Pico Tank! Wavemaker/powerhead suggestions?

lainamarie

New Member
View Badges
Joined
Jun 12, 2024
Messages
20
Reaction score
38
Location
Langley
Rating - 0%
0   0   0
ALRIGHT!

So I always called my 3gallon a nano tank, apparently I’m mistaken, it’s a pico.

Currently my small clown is housed in the pico and it’s been sorely neglected, I have some CUC in there and a sexy shrimp, and some small feather dusters that have just appeared. I have a berzerko cyphastrea in there managing and a dead birds nest coral. The cyano bacteria is out of this world and there’s some bubble algae that I intend to get some emerald crabs to handle in there.

Basically my question is how to handle the cyano? I can manually remove a lot of it from the sand bed for sure, so I will do that.

I’d like to move my clown to my main display tank, and get a pico reef light that’s affordable (SUGGESTIONS PLEASE!) something that doesn’t get hot!

I want some water movement because ideally I’d like a bunch of flowy corals to just take over, get some emerald and pompom crabs and a bunch of shrimps!

So anyways, recommendations?

IMG_4637.jpeg
 

VintageReefer

10K Club member
View Badges
Joined
Nov 16, 2023
Messages
10,181
Reaction score
16,462
Location
USA
Rating - 100%
2   0   0
SPS: 10x10”
Mixed Reef: 14x14
Soft Corals/FOWLR: 16x16

Or
SPS: 12” x 12”
Mixed Reef: 18” x 18”
Soft Corals/FOWLR: 24x24
 
OP
OP
lainamarie

lainamarie

New Member
View Badges
Joined
Jun 12, 2024
Messages
20
Reaction score
38
Location
Langley
Rating - 0%
0   0   0
SPS: 10x10”
Mixed Reef: 14x14
Soft Corals/FOWLR: 16x16

Or
SPS: 12” x 12”
Mixed Reef: 18” x 18”
Soft Corals/FOWLR: 24x24
unfortunately with the stiff yet moveable arm on these types, I won’t be able to fit the tank into its new home which will be like 13inx13in little square in an ikea kallax shelf, so i would need a flat square type light!

any powerheads?!
 

Reef_Freak720

Well-Known Member
View Badges
Joined
Jan 24, 2016
Messages
662
Reaction score
746
Rating - 0%
0   0   0
Only pico powerhead I've seen is a 3d printed one.

Maybe try an airpump? That's how I added flow to my reef bowl way back when

As far as light have you thought about using one of those led reef bulbs that screw in?
 
OP
OP
lainamarie

lainamarie

New Member
View Badges
Joined
Jun 12, 2024
Messages
20
Reaction score
38
Location
Langley
Rating - 0%
0   0   0
Only pico powerhead I've seen is a 3d printed one.

Maybe try an airpump? That's how I added flow to my reef bowl way back when

As far as light have you thought about using one of those led reef bulbs that screw in?
didn’t even know they had that! i considered the nicrew clip 5/8ths clip on for rimless tanks, its rimless so it should work and its like 50$ and i saw a review with it on the same tank i have so.. maybe shall try.

i never thought of using an air pump just to increase flow and i happen to have like 5 of them so maybe i’ll give that a shot!

i read another threat and someone was using a 1600gph powerhead on nutrient mode for a 5 gallon
 

Reef_Freak720

Well-Known Member
View Badges
Joined
Jan 24, 2016
Messages
662
Reaction score
746
Rating - 0%
0   0   0
didn’t even know they had that! i considered the nicrew clip 5/8ths clip on for rimless tanks, its rimless so it should work and its like 50$ and i saw a review with it on the same tank i have so.. maybe shall try.

i never thought of using an air pump just to increase flow and i happen to have like 5 of them so maybe i’ll give that a shot!

i read another threat and someone was using a 1600gph powerhead on nutrient mode for a 5 gallon
I ran the reef breeders version on the picos I had going.

You just don't want too much air as to cause water to splash out, salt creep everywhere lol.

That's smart. I'd be worried about it accidentally coming out of nute mode and mixing up the whole tank. But that's just my anxiety.
 

VintageReefer

10K Club member
View Badges
Joined
Nov 16, 2023
Messages
10,181
Reaction score
16,462
Location
USA
Rating - 100%
2   0   0
This is the smallest powerhead I’ve come across, it’s 530gph on max power but of course you wouldn’t use max. It’s adjustable. The nutrient and wave modes pulse it on and off also so things aren’t blasted by constant flow

 
OP
OP
lainamarie

lainamarie

New Member
View Badges
Joined
Jun 12, 2024
Messages
20
Reaction score
38
Location
Langley
Rating - 0%
0   0   0
I ran the reef breeders version on the picos I had going.

You just don't want too much air as to cause water to splash out, salt creep everywhere lol.

That's smart. I'd be worried about it accidentally coming out of nute mode and mixing up the whole tank. But that's just my anxiety.
i’d be worried about that too. i found a tiny fountain pump (like for a cat fountain or a small waterfall) i’ll try sticking that to the side of the tank lol.

gotta love the huge boxes of random equipment!
 
OP
OP
lainamarie

lainamarie

New Member
View Badges
Joined
Jun 12, 2024
Messages
20
Reaction score
38
Location
Langley
Rating - 0%
0   0   0
This is the smallest powerhead I’ve come across, it’s 530gph on max power but of course you wouldn’t use max. It’s adjustable. The nutrient and wave modes pulse it on and off also so things aren’t blasted by constant flow

oh dope! that’s pretty much perfect if it’s adjustable but ya if it fails i’d feel bad if they do get blasted. just sad shrimpies flailing around in a whirlpool
 

dedragon

5000 Club Member
View Badges
Joined
Feb 23, 2019
Messages
6,109
Reaction score
4,535
Rating - 0%
0   0   0
in a tank this small usually the filtration has enough flow for the whole tank, whether that is from a power filter or return from sump. Im using an innovative marine spinstream on my 12"x12"x6" and its doing a good job of changing the water flow in such a small tank
 

souciemm

Community Member
View Badges
Joined
Sep 19, 2023
Messages
61
Reaction score
32
Location
Boone
Rating - 0%
0   0   0
I use this one in my 6 gallon Jecod ELW-3M. Its super adjustable and programable. But for 3 gallons you could probably get away with just a return pump in the 50-120gph range or air pump.
 

VintageReefer

10K Club member
View Badges
Joined
Nov 16, 2023
Messages
10,181
Reaction score
16,462
Location
USA
Rating - 100%
2   0   0
My pico is 1.1g and return pump is enough. A stronger return pump could replace the need for powerheads in small tanks
 

Tamberav

10K Club member
View Badges
Joined
Jul 4, 2014
Messages
10,780
Reaction score
16,238
Location
Duluth, MN
Rating - 0%
0   0   0
I used a jeabo sow-4 on a 5g. Had to play with settings but got it to work just perfect.

I believe they make even a smaller one now called sow-3
 

HAVE YOU EVER KEPT A RARE/UNCOMMON FISH, CORAL, OR INVERT? SHOW IT OFF IN THE THREAD!

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top