OP
OP
Shout out to rhinos reef for the media cups and @SaltwaterandLime, sorry I stole your idea but they are to awesome to pass up!! Thanks for working with rhino to get the design going!!
OutCold’s Tideline 65 gallon AIO
- AIO Build
- Thread starter OutColdCRNA
- Start date
Those look sweet as hell. I just ordered a 49 lagoon. I contacted him about make me some for it
What are you using in yours? Just filter floss or do they have compartments or levels?
They are literally just a basket. I had asked him to make them 5 inches deep with about the top inch of so solid to force water to pass through the media. I currently have only filter floss in them and have been changing it every other day
I have carbon and gfo in a reactor but you could easily add a bag in the media basket under your floss
Thanks for the reply. I am gonna order a set for my upcoming 49 lagoon. I may try to put some carbon or other media in under the floss as well
Lol. Typing at the same time
OP
OP
Started filling the tank and hooking up all the equipment to the apex today! Whew, the apex is intimidating, having never had one but, it connected to my wifi without any issues. Wish I could say the same for my jebao MLW pumps!
OP
OP
And we are officially running!! Just have to figure out how to program the ATO via the apex and calibrate the PH probe.
Have on more MLW for the back wall that is of course delayed in shipping.
OP
OP
Nothing much new to report as the cycle is in full swing on both tanks. Made a frag rack for the lagoon and placed it in the tank. Should have enough space for at least 150 frags!!
apex has been running like a champ since getting the PH probe calibrated and hooking up the optical sensors for the ATO. Now if only the skimmer would break in and quit the micro bubbles everything would be on track!
apex has been running like a champ since getting the PH probe calibrated and hooking up the optical sensors for the ATO. Now if only the skimmer would break in and quit the micro bubbles everything would be on track!
Which skimmer did you go with? I'm still struggling with the aquamaxx although it's skimming very well, I still get bubbles after months
OP
OP
I went with the aquamax ws1. It’s gotten better I think but still a lot of them. I may have to figure out something to do as a bubble trap at the return section.
I ended up building a little acrylic stand for it to raise it up higher in the water, and then put a very coarse sponge after it
OP
OP
I had some extra egg crate. So used that for a stand and put some filter floss pad on the exhaust side. To fine and water was overflowing the pad. Need something more coarse.
I had the same problem with my first sponge attempt also
OP
OP
Thanks!!! It’s great to actually be able to take the time and energy to do it how I really wanted to do it!!
OP
OP
I go asked o setup a tank for my nephews fifth grade class. The kids raised almost $300. I donated a 20 long I had lying around. I need to add some more rock to it. But I’m pleased how it came out especially on the cheap. This will be just a fowlr tank so shouldn’t be to difficult to manage.
OP
OP
The ws1 is still making micro bubble but not nearly as bad as on initial setup. I added an airline and cheap air valve I had laying around to fine tune the air draw to the skimmer. That has helped immensely! Tank has been cycling for 3 weeks with bottle bacteria. Used dr. Tim’s and daily doses of microbacter 7. I am fully cycled and will be ordering the first fish from dr. Reef. Problem being is that even in louisiana the temperature has been below freezing. So waiting until next week to order when the temps are back up around 60.
Similar threads
