Neptune Systems ATK Giveaway!

[Reef News]

Neptune Systems ATK Giveaway!
Sponsored by NeptuneSystems.com and REEF2REEF.com

The ATK (Automatic Top-off Kit) is a simple, standalone, and complete solution for replacing water lost to evaporation. The ATK – Automatic Top-Off Kit was designed to not only be super-simple to install and use, but it is unique in the market as an ATO device with three layers of redundant monitoring and water-level control. The ATK does the work for you, while at the same time protecting your tank and your home. And now you can win one for free!

How to Enter:

- Check out all the details of the ATK (Automatic Top-Off Kit) Here and then post back in this thread about what your favorite features are. This will be your official entry. https://www.neptunesystems.com/products/expansion-modules/atk/

BONUS ENTRY #1: Take a photo of any Neptune Systems product that you own and post it in a separate post within this thread.

BONUS ENTRY #2: Share the Facebook announcement about this contest on your Facebook page and then post back in here that you completed this entry. The announcement can be found here:


Note: Please create a separate post for each entry. There is a possibility of having three entries.


Drawing:
On July 28th we will pick one winner by random draw from this thread pending verification of entry(s).


The Prize:
A Neptune Systems Automatic Top-Off Kit or ATK Valued at $200+ shipped to your door.

The ATK (Automatic Top-off Kit) is a simple, standalone, and complete solution for replacing water lost to evaporation. The new aquarium hobbyist has many challenges, but none is more annoying than the chore of adding water, every day, to make up for that lost to evaporation (a.k.a. topping off/up). This alone usually makes the automatic top-off (ATO) device the first piece of automation equipment purchased. The ironic flip side of this decision is that a faulty ATO device is one of the leading reasons for catastrophic aquarium failure, or even worse, flooding of the house or business. Not all ATO devices are created equal. Sadly, many ATO on the market are made with cheap components, have very little protection against these catastrophes, and are just a nightmare to assemble and install correctly. An ATO does not have to be both a blessing and a curse! We designed our ATK – Automatic Top-Off Kit to not only be super-simple to install and use, but it is unique in the market as an ATO device with three layers of redundant monitoring and water-level control. The ATK does the work for you, while at the same time protecting your tank and your home.

Thanks again to NeptuneSystems.com!

 

[Steve K]

I like that it doesn't rely on a mechanical float switch like my constantly broken DIY setup

 

[Bob E]

I love the extra redundancy build in it help’s with peace of mind, and the that can also be used as a standalone increases my options

 

[Salty1962]

I like the following:
1. Product comes from a reputable company with exceptional customer service!
2. Ability to control another critical function of my tank through my APEX. Valuable feedback/alarms of topoff levels with the proven reliability of my APEX controller.
3. Availability to remotely monitor and manipulate topoff functions.
4. Excellent fail safe operation with optical and mechanical liquid level sensors.
5. Reliable DC pump with the power to push water up to 14'.
6. Ability to track amount of topoff used for future planning of extended vacations or time away from tank.
7. Ability to expand and grow future ATO needs.
8. Ability to expand flow control and leak detection functions of my APEX.
9. Ability to operate topoff functions if I don't have an APEX.

Very exciting capability to add to my robust APEX system. Would love to have one to aid in my confidence of leaving my tank for extended periods.

 

[Bluedore]

I like the optical sensor & float combination.

 

[Orangezuk]

Has everything I was trying to incorporate and build into my system.
-Two optical sensors
-Float shut off
-Intelligent programming
Big A+ to Neptune for making the ATK a stand alone system, would think it's a great intro for those thinking about their controllers.

 

[treedog5]

Best feature hands down is the fact that you don't need a Apex to control ATK...

 

[SOONERreef]

Best part of this is the safety features that check and balance one another to prevent equipment failure!

 

[Tuffyyyyy]

I like it because it's made by Neptune.

 

[Salty1962]

Done!
https://www.facebook.com/Salty1962

 

[Charlie Denmark]

Hi from Denmark. I love the following things a LOT.
The availability to remotely monitor and manipulate topoff functions.

The fail safe operation with optical and mechanical liquid level sensors.

The possibility to track amount of topoff used for future planning of extended vacations or time away from tank. Greate!!!!

I love to see this product live.

I've been the happy owner of the apex system for 5 months now. I simply love it.

 

[VillageIdiot]

The redundant sensor/float switch combination.

 

[Charlie Denmark]

This is my favorite feature on apex systems now.
The possibility to monitor the reef when away and to feed the fish from distance


LOVE IT!

 

[glb]

I like the triple redundancy and especially that it is a stand-alone product. I plan on buying an Apex at some point and knowing this ato will plug right in is a huge selling point! I just set up a new 40g and would love to put this ato in it!

 

[Scurvy]

Redundancies and integration with exisiting apex are my favorite features. Adding in PMUP's and automation so i never have to touch a bucket again is also a plus. I want to win!

 

[Smotz]

I really like the use of optical and float sensors, and that it can be used with an Apex or standalone.

 

[nitro]

It has so many options and ultra redundant,it is more than just a top off..

 

[pelphrey]

Because I am running the apex and can monitor yet another very important aspect of the tank!

 

[pelphrey]

 

[Awesome Dennis]

My favorite feature of the ATK is that if I win I won't have to explain to th wife why I need to sped 200$.
I also like how you can add extra sensors for water levels or use leak detectors.