Need some help on Calibrating the Ecotech Vectra M1 pump???

[FLSharkvictim]

Does anybody know how to calibrate the Ecotech Vectra M1 pump so I can use the feeding mode.. If you own the M1 OR the L1, let me know how you did yours, it would be HIGHLY appercaited..

 

[Broadfield]

The easiest thing I found was to watch their video on it.... it's easier than the written instruction manual.

 

[Jonathan Iu]

If you have the reeflink just set feed mode.

 

[Broadfield]

If you have the reeflink just set feed mode.

The pump needs to be calibrated though... so 100% on the dial actually equals 100% and so on.

 

[FLSharkvictim]

If you have the reeflink just set feed mode.

FYI, The Reeflink does not support the Ecotech M1 or the L1 return pumps, Only supports the MP40's, MP10's power heads and the Ecotech LED lights...but thanks....
Many thanks for the YouTube video...

 

[Jonathan Iu]

The pump needs to be calibrated though... so 100% on the dial actually equals 100% and so on.

Yep I did that thru Reeflink also. Just make sure you water level is below the return pipe so you can see the flow.

 

[Desmond]

FYI, The Reeflink does not support the Ecotech M1 or the L1 return pumps, Only supports the MP40's, MP10's power heads and the Ecotech LED lights...but thanks....
Many thanks for the YouTube video...

Are you sure it does not support them ?

 

[FLSharkvictim]

100% PER ECOTECH!