Need help setting up your ProfiLux 4? *** PC edition ***

[Vinny@GHLUSA]

The fuse is directly underneath the main power switch. Remove the cap to access it.
If you need further assistance, please open a support ticket.

 

[Yanos]

Thank you. Great as always

 

[Yanos]

How do I turn on GHL logo on my P4?

 

[Member No 1]

How do I turn on GHL logo on my P4?

In myGHL connect or the app, click top left, general tab, then scroll down. You can select mode & brightness.

 

[Yanos]

I’ve done it, but nothing.
My Kh director and doser 2.1 shows the light, but P4 doesn’t

 

[Member No 1]

I’ve done it, but nothing.
My Kh director and doser 2.1 shows the light, but P4 doesn’t

That might be an issue with the P4 itself. When I change the mode or intensity, it adjusts the P4 and all attached PAB devices.

 

[Yanos]

What sort of issue would that be?

 

[Member No 1]

What sort of issue would that be?

That I don't know. If the LED isn't working, but the P4 is functioning properly, and controlling your tank correctly, I wouldn't worry about it to much. Put in a ticket to GHL.
Have you logged into the P4 thru your PC using the GCC software? See if you can change it there.

 

[Yanos]

That I don't know. If the LED isn't working, but the P4 is functioning properly, and controlling your tank correctly, I wouldn't worry about it to much. Put in a ticket to GHL.
Have you logged into the P4 thru your PC using the GCC software? See if you can change it there.

Everything works as it should, apart from that logo.
I’ll give it a go
Thx buddy

 

[Member No 1]

Everything works as it should, apart from that logo.
I’ll give it a go
Thx buddy

One thing I noticed, I was messing with the Logo brightness, and at 20% the P4 was off with all other devices were still on. Check the intensity level. Set it to 100%

 

[Yanos]

Ok, so red works at 100% and at 20% turns P4 logo off
On green at 100% P4 logo is dimmed and at 20% turns off
On blue P4 logo is off all the time.
Is there any way to fix it?

 

[Member No 1]

Ok, so red works at 100% and at 20% turns P4 logo off
On green at 100% P4 logo is dimmed and at 20% turns off
On blue P4 logo is off all the time.
Is there any way to fix it?

View attachment 1484204 View attachment 1484206 View attachment 1484210

Not sure how to proceed. Summit a ticket to support.
Good luck, hope you get it sorted out.

 

[Gonzo74]

In your experience, what is the typical turn around time when sending GHL products in to be serviced or inspected? Can anyone share their experience with me?

 

[siggy]

I could use a little help Sprechen Sie Deutsch.
My controller is set to German. I did the hard reset and still set on Deutsch.

 

[Vinny@GHLUSA]

Take a look at the guide.
We have a part there that shows the steps. See page 9.

It is also doable in the app. See General settings page.

 

[Steve2020]

Ok, so red works at 100% and at 20% turns P4 logo off
On green at 100% P4 logo is dimmed and at 20% turns off
On blue P4 logo is off all the time.
Is there any way to fix it?

View attachment 1484204 View attachment 1484206 View attachment 1484210

Yanos, did you find out why the P4 logo does not work with blue? I have the same issue. Power Bars, Doser and Expansion Box work fine.

 

[Yanos]

No I didn’t mate. Looks like I have to live with it :mad:

 

[Ditto]

Did you take off the cover to see if the connector was loose?

 

[Steve2020]

Did you take off the cover to see if the connector was loose?

No But i will. I would of thought if the connection was loose non of the colors would work. I'll take a look. Thanks Ditto.

 

[Steve2020]

Did you take off the cover to see if the connector was loose?

Hey Ditto, Quick Question. Is there a way to setup a mixing station pump on/off schedule without scheduling multiple timer settings? Example would be running a mixing station pump for 10 minutes every 2 hrs every day.