jsker
Reefing is all about the adventure
- Review score
- +0 /0 /-0
Staff member
Super Moderator
Partner Member 2023
R2R Supporter
R2R Excellence Award
Reef Tank 365
Article Contributor
Hospitality Award
Ocala Reef Club Member
R2R Secret Santa 2022
- Joined
- Apr 11, 2015
- Messages
- 23,670
- Reaction score
- 68,609
- Review score
- +0 /0 /-0
- Location
- Central Florida
Good Sunday afternoon
Reporting for the mad labs and reef location office tank.
Ok, the tank stirr- I am happy to report that was a success and the the tank is clearer with no stress to the system, even some of the nusine algae is gone plus the tiny bit of cyano that was coming back.
Testing. I have been running a test with the Hanna checkers and why my measurement are sometimes off. My conclusion, do not reuse the tips, syringes because leftover reagent is in the tips and dries inside the tips between test, clean the calcium test piperator tip with ro/di before pulling a sample same as the reagent tips, drying a evaporation and dry will throw of the testing. Better yet source new pipeartor tips and toss them after each test. Tips are $13.00 (Don I got it right) for 1000. As far as 1ml/cc syringes 6.95 per 100.
Plan, purchase two adjustable pipettes and tips. one 10 to 1000ul and 1 to 10 ml. Yes this is over board but more toys
I also decided to stick with my DOS instead of getting a different AWC even though the DOS in noise and click. I read up on how to solve the clicks. Reason I like the control ability, and new heads every 6 months you a year are better than guessing
I am still waiting for the Kore 7th and this is when I think I will change to the Kore 7th for the AWC.
I know you have been waiting for my parameters and wait no more
Ca 436
Mg 1500, ;Punch;Punch salifert test kit will be replace soon. always tested high
Alk 8.4
Phosphates .05 going to dose my go to lanthanum chloride
Nitrates 2.5 to 5 and one more stirr
Salinity 34 DT
NSW 33
Burt it now attacking the syringe when I take samples in the DT, Hunter is close behind.
Reporting for the mad labs and reef location office tank.
Ok, the tank stirr- I am happy to report that was a success and the the tank is clearer with no stress to the system, even some of the nusine algae is gone plus the tiny bit of cyano that was coming back.
Testing. I have been running a test with the Hanna checkers and why my measurement are sometimes off. My conclusion, do not reuse the tips, syringes because leftover reagent is in the tips and dries inside the tips between test, clean the calcium test piperator tip with ro/di before pulling a sample same as the reagent tips, drying a evaporation and dry will throw of the testing. Better yet source new pipeartor tips and toss them after each test. Tips are $13.00 (Don I got it right) for 1000. As far as 1ml/cc syringes 6.95 per 100.
Plan, purchase two adjustable pipettes and tips. one 10 to 1000ul and 1 to 10 ml. Yes this is over board but more toys
I also decided to stick with my DOS instead of getting a different AWC even though the DOS in noise and click. I read up on how to solve the clicks. Reason I like the control ability, and new heads every 6 months you a year are better than guessing
I am still waiting for the Kore 7th and this is when I think I will change to the Kore 7th for the AWC.
I know you have been waiting for my parameters and wait no more
Ca 436
Mg 1500, ;Punch;Punch salifert test kit will be replace soon. always tested high
Alk 8.4
Phosphates .05 going to dose my go to lanthanum chloride
Nitrates 2.5 to 5 and one more stirr
Salinity 34 DT
NSW 33
Burt it now attacking the syringe when I take samples in the DT, Hunter is close behind.
Last edited: