Live rock
- Thread starter andy6978
- Start date
- Tagged users None
Gumbies R Us
Certified Noob
I see no issues with using it, how long has it been sitting outside of a tank?New to this Iv had fluval 13.5 with no issues to speak of except for algae in the beginning. I’m going to 100 gal tank and was wondering if I could use this rock the previous owner used
Stevorino
Well-Known Member
If it's free to you, I'd take it and cook it until you can confirm there isn't a bunch of phosphates bound up in it. That may add some time to your overall process, but worth it in the long-run.
If you have to pay for it, I'd just make sure you are getting a good price for it.
If you have to pay for it, I'd just make sure you are getting a good price for it.
andy6978
New Member
It came with the tank I’m starting with new live sand . Don’t know if I messed up but someone suggested bleaching. I did and have rinsed very very well and soaked about 4 different times with declorinator and have sun dried them . They were free with the tank
I always put used rocks into a bucket of bleach water (some use muractic acid) which melts out all the dead micro-organisms inside the rock, with a powerhead, usually 4-5 days is sufficient. Don't just soak the rocks, put a powerhead in there to move the water.
After bleaching, put in a rodi water bucket with a powerhead. I do a rodi water change after a few days, careful to rinse all the bleach out. Don't use tap water, that has more stuff that might leach back into the rock.
Some call this process cooking, some call this curing, but it means removing all organic waste from the rock.
Once thats done put it in some new saltwater to test if phosphates are leaching from the rocks. If yes, then use a liquid phosphate remover like phosphate-e to suck out the phosphate, keep adding and testing until the rocks stop leaching.
Once thats all done you've got perfectly white sterile rocks. Good luck
After bleaching, put in a rodi water bucket with a powerhead. I do a rodi water change after a few days, careful to rinse all the bleach out. Don't use tap water, that has more stuff that might leach back into the rock.
Some call this process cooking, some call this curing, but it means removing all organic waste from the rock.
Once thats done put it in some new saltwater to test if phosphates are leaching from the rocks. If yes, then use a liquid phosphate remover like phosphate-e to suck out the phosphate, keep adding and testing until the rocks stop leaching.
Once thats all done you've got perfectly white sterile rocks. Good luck
Stevorino
Well-Known Member
That all sounds like a great start!
EDIT: Mr Mojo beat me to it - love everything he wrote
Similar threads
