@SunnyX. Could this be the return of sunnyx and Pro corals? Great to see you posting again and we would love to see you back in the hobby!
Just a few tips and tricks for those new to SPS and reefing....
- Thread starter SunnyX
- Start date
- Tagged users None
Daniel@R2R
Living the Reef Life
Staff member
Super Moderator
Reef Squad
Partner Member 2024
Excellence Award
Photo of the Month
Article Contributor
Hospitality Award
Article Administrator
Reef Pumpkin Carver
R2R Secret Santa 2023
My Tank Thread
Rox 0.8 is the good stuff.
I like the stuff by BRS or Aquamaxx
SeaDweller
2500 Club Member
I’ve used everything including the cheapest one from BRS and that one rinses clean pretty quickly.
jose hernandez
Valuable Member
- Joined
- Aug 21, 2015
- Messages
- 2,113
- Reaction score
- 341
what is a good coral dip for sps i hear bayer is most reefers choice just dont know which one and how to go about using it starting a reefer 750xxl which will be a sps only tank wanna get it right
Thanks!! This was really good advice for me just getting into the hobbyHey guys and gals, I wanted to start out helping you Reef2Reef members so here is a list of helpful tips & tricks that can help out.
These are just a few things off the top of my head to aid new reefers. If you experienced reefers out there have anything to add PLEASE do so.
1. Place a powerhead in sump. The powerhead will help keep detritus waste in suspension making it easier for skimmer and corals to take up. You should also make it a habit to stir up any detritus that has settled in sump at least once a week. People often neglect this simple chore and it creates problems down the road as the waste builds up. I have a Tunze 6045 in my sump and it keeps all waste and particles in suspension.
2. Keep your lighting systems as clean as possible. You should make it a habit to clean your reflectors, bulbs, etc at least once a month. Even a little salt spray can reduce lighting but up to 30%! Also, if you’re running Metal Halides please check the bulbs for any cracks or warping. The UV leaking from a cracked Metal Halide can absolutely wipe out any corals under it in no time at all.
3. Carbon. I highly recommended that everyone run carbon, either in a mesh bag in the sump or in a Phosban reactor. If you run it in a mesh bag replace it once a month, in a reactor replace it every 2-4 weeks. Carbon is the simplest and easiest way to maintain a healthy and thriving reef system. Without carbon, Compounds such as yellow phenol can build up. Yellow Phenol is great at absorbing light, thus reducing the amount of PAR reaching your corals. Carbon is also good at removing compounds released by corals. Corals can and will release compounds to fend off other corals in the tank, the carbon will help keep all stress and damage to a minimum. Carbon is also a good insurance policy as it will absorb any harmful chemicals and contaminants that can enter the tank, such as aerosol air fresheners.
4. Create a routine and stick with it. Once a month you should clean out any detritus in the sump, clean ALL powerheads, pumps, probes, and inspect all equipment for defects. A dirty power head has been found to reduce performance, in some cases up to 40%+.
5. Account for everything that you put into the system. Chemicals and compounds build up over time and need to be accounted for. You must find a proper method to export the food and chemicals that are put into the system. Water changes work well and are probably the simplest method of halting the build up of harmful compounds. A refugium is also a good idea and it will aborb and process nutrient and may give off compounds that are beneficial to some corals. Bacterial driven systems such as Zeovit, Prodibio, and Fauna Marin are also good methods for keep parameters in line. Personally, I do daily additions of bacteria and a carbon source(Vodka). I have found a bacterial driven system along with a large skimmer to be the most efficient and cost effective means of keeping nutrients in line.
6. Get the biggest skimmer you can accommodate. I believe that a protein skimmer is one of the most important parts of a healthy reef system. The skimmer I have on my system is rated for 3-4 times more then my system volume. With a larger simmer you can keep a higher bio load and effectively keep the nutrients down. The skimmer will help add oxygen to your system and is a good insurance policy against unforeseen events in the system.
7. Plan ahead when purchasing and placing corals in your system. All to often, people pack more corals into their tanks then they can support. In the beginning this fine but corals soon grow and problems arise. Corals can chemically detect the presence of surrounding corals, and if corals are too close this will stunt their growth. I found the best success with giving corals ample space to grow stress free. when considering what corals to put in your tank, take the time to look up what they will look like as they mature. Do you really want a monster montipora cap. taking over your reef? This brings me to coral placement. By knowing what a coral will look like when it matures you can place it accordingly. obviously you would not want a Montipora cap. placed high up in the tank, as this will only lead to corals beneath it to eventually die due to lack of light from the shade.
8. Backup Power. While I hope that you’ll never need to use one, a backup source of power can save your system from certain disaster. A generator powerful enough to power the heaters and powerheads is usually all you would need for a power outage lasting 1-2 days. So long as the aquarium has adequate flow and heat the inhabitants will be fine. Anything longer than 3 days and you would be looking for a larger generator to power lighting, as the corals will now be starting to brown out. If you are running EcoTech Vortech pumps a great insurance policy against power outages would be the EcoTech Battery Backup.
9. Keep Fresh Saltwater on Standby. Mishaps can occur in the life of a reef aquarium. You could accidentally dose too much of a given element, a clan may spawn, or some other chemical agent may have gotten into the system. I would recommend that you keep at least 25% of the aquariums volume in fresh saltwater on standby. I have always had at least 60 gallons of fresh saltwater on standby for water changes and mishaps. Yes, it will add to the expense of the hobby, as the water will need to be heated, housed, and circulated. But, I cant tell you how many time the fresh saltwater has prevented a major disaster.
10. Dip your Corals. These days, there are many pests floating around the hobby. From AEFW to Red Bugs, one can never be too careful when introducing a new coral into your system. Personally, I use ReVive Coral Cleaner. While Revive will take care of Red Bugs and live AEFW, it will not have an affect on AEFW eggs. For This reason, I prefer fresh cut Acropora fragments. This way, I know that I am not importing any pests or algae into my system.
11. Combat Chronically Low Ph. A simple method for combating low Ph is to run a refugium on a reverse light cycle. The added benefit of this is that you will also be reducing P04 levels. The refugium lights should come on 30 minutes after the main system lights have gone off. The refugium lighting should run for the duration of the night, and turn off 30 minutes before the sun rises on your reef.
12. Write Things Down. Its easy to forget when you replaced a light bulb or changed out your carbon. The simplest solution is to keep a record of any changes you have made to the system. I used to keep a written log near my system as a reminder to change out certain components. With the advent of smart phone it is now much easier to keep track of system. There are many built in applications that will allow you log and set reminders for maintenance items such as replacing light bulbs and carbon.
13. Stock up on Vinegar. One of the best investments for your system is vinegar. From cleaning calcium build up on pumps to helping feed bacteria in your system, vinegar does it all.
14. Proper Feeding Protocol. One other thing I feel that needs to be addressed is proper feeding protocol:From what I have seen and read, people overfeed their tanks. I feed my fish every other day. My fish are fat and happy, and I have never had any issues even with the Anthais I have. If you do not keep up with a means of waste export, such as PO$ remover, Bacteria/carbon dosing, or water changes you stand the risk of having reduced corals health and an algae outbreak.
Now, how much you feed your fish is just as important as how often. Some people feed their fish five times a day and their systems look great. I suspect that they are feeding very small amounts of food, or that they are diligent about exporting waste. Unfortunately, not all reefers are as diligent and they quickly end up having issue related to elevated waste. For those who just cant get corals to grow or color up to the desired level I suggest that you rethink what,how, and when you are feeding.
15. Keep It Simple. The simpler your system, the better. All to often we tend to over-think and complicate our setups. With more components come more opportunities for things to go wrong. Focus on water flow, lighting, and nutrient export. A reef aquarium should be enjoyable and not a job or laborious task. Have fun, and try not to make too many changes at once.
Well, I hope that this list will help reefers, new and experienced. I will be adding to this list from time to time.
Question, new to this...purchased a couple small pieces of live rock from a lfs for my new tank a few days ago and noticed Aiptasia. About 5-6 pieces...so far. Easier to just get rid of the rock itself or try to treat for it? Not a big loss deal if easier to get rid of the rock. Thank youHey guys and gals, I wanted to start out helping you Reef2Reef members so here is a list of helpful tips & tricks that can help out.
These are just a few things off the top of my head to aid new reefers. If you experienced reefers out there have anything to add PLEASE do so.
1. Place a powerhead in sump. The powerhead will help keep detritus waste in suspension making it easier for skimmer and corals to take up. You should also make it a habit to stir up any detritus that has settled in sump at least once a week. People often neglect this simple chore and it creates problems down the road as the waste builds up. I have a Tunze 6045 in my sump and it keeps all waste and particles in suspension.
2. Keep your lighting systems as clean as possible. You should make it a habit to clean your reflectors, bulbs, etc at least once a month. Even a little salt spray can reduce lighting but up to 30%! Also, if you’re running Metal Halides please check the bulbs for any cracks or warping. The UV leaking from a cracked Metal Halide can absolutely wipe out any corals under it in no time at all.
3. Carbon. I highly recommended that everyone run carbon, either in a mesh bag in the sump or in a Phosban reactor. If you run it in a mesh bag replace it once a month, in a reactor replace it every 2-4 weeks. Carbon is the simplest and easiest way to maintain a healthy and thriving reef system. Without carbon, Compounds such as yellow phenol can build up. Yellow Phenol is great at absorbing light, thus reducing the amount of PAR reaching your corals. Carbon is also good at removing compounds released by corals. Corals can and will release compounds to fend off other corals in the tank, the carbon will help keep all stress and damage to a minimum. Carbon is also a good insurance policy as it will absorb any harmful chemicals and contaminants that can enter the tank, such as aerosol air fresheners.
4. Create a routine and stick with it. Once a month you should clean out any detritus in the sump, clean ALL powerheads, pumps, probes, and inspect all equipment for defects. A dirty power head has been found to reduce performance, in some cases up to 40%+.
5. Account for everything that you put into the system. Chemicals and compounds build up over time and need to be accounted for. You must find a proper method to export the food and chemicals that are put into the system. Water changes work well and are probably the simplest method of halting the build up of harmful compounds. A refugium is also a good idea and it will aborb and process nutrient and may give off compounds that are beneficial to some corals. Bacterial driven systems such as Zeovit, Prodibio, and Fauna Marin are also good methods for keep parameters in line. Personally, I do daily additions of bacteria and a carbon source(Vodka). I have found a bacterial driven system along with a large skimmer to be the most efficient and cost effective means of keeping nutrients in line.
6. Get the biggest skimmer you can accommodate. I believe that a protein skimmer is one of the most important parts of a healthy reef system. The skimmer I have on my system is rated for 3-4 times more then my system volume. With a larger simmer you can keep a higher bio load and effectively keep the nutrients down. The skimmer will help add oxygen to your system and is a good insurance policy against unforeseen events in the system.
7. Plan ahead when purchasing and placing corals in your system. All to often, people pack more corals into their tanks then they can support. In the beginning this fine but corals soon grow and problems arise. Corals can chemically detect the presence of surrounding corals, and if corals are too close this will stunt their growth. I found the best success with giving corals ample space to grow stress free. when considering what corals to put in your tank, take the time to look up what they will look like as they mature. Do you really want a monster montipora cap. taking over your reef? This brings me to coral placement. By knowing what a coral will look like when it matures you can place it accordingly. obviously you would not want a Montipora cap. placed high up in the tank, as this will only lead to corals beneath it to eventually die due to lack of light from the shade.
8. Backup Power. While I hope that you’ll never need to use one, a backup source of power can save your system from certain disaster. A generator powerful enough to power the heaters and powerheads is usually all you would need for a power outage lasting 1-2 days. So long as the aquarium has adequate flow and heat the inhabitants will be fine. Anything longer than 3 days and you would be looking for a larger generator to power lighting, as the corals will now be starting to brown out. If you are running EcoTech Vortech pumps a great insurance policy against power outages would be the EcoTech Battery Backup.
9. Keep Fresh Saltwater on Standby. Mishaps can occur in the life of a reef aquarium. You could accidentally dose too much of a given element, a clan may spawn, or some other chemical agent may have gotten into the system. I would recommend that you keep at least 25% of the aquariums volume in fresh saltwater on standby. I have always had at least 60 gallons of fresh saltwater on standby for water changes and mishaps. Yes, it will add to the expense of the hobby, as the water will need to be heated, housed, and circulated. But, I cant tell you how many time the fresh saltwater has prevented a major disaster.
10. Dip your Corals. These days, there are many pests floating around the hobby. From AEFW to Red Bugs, one can never be too careful when introducing a new coral into your system. Personally, I use ReVive Coral Cleaner. While Revive will take care of Red Bugs and live AEFW, it will not have an affect on AEFW eggs. For This reason, I prefer fresh cut Acropora fragments. This way, I know that I am not importing any pests or algae into my system.
11. Combat Chronically Low Ph. A simple method for combating low Ph is to run a refugium on a reverse light cycle. The added benefit of this is that you will also be reducing P04 levels. The refugium lights should come on 30 minutes after the main system lights have gone off. The refugium lighting should run for the duration of the night, and turn off 30 minutes before the sun rises on your reef.
12. Write Things Down. Its easy to forget when you replaced a light bulb or changed out your carbon. The simplest solution is to keep a record of any changes you have made to the system. I used to keep a written log near my system as a reminder to change out certain components. With the advent of smart phone it is now much easier to keep track of system. There are many built in applications that will allow you log and set reminders for maintenance items such as replacing light bulbs and carbon.
13. Stock up on Vinegar. One of the best investments for your system is vinegar. From cleaning calcium build up on pumps to helping feed bacteria in your system, vinegar does it all.
14. Proper Feeding Protocol. One other thing I feel that needs to be addressed is proper feeding protocol:From what I have seen and read, people overfeed their tanks. I feed my fish every other day. My fish are fat and happy, and I have never had any issues even with the Anthais I have. If you do not keep up with a means of waste export, such as PO$ remover, Bacteria/carbon dosing, or water changes you stand the risk of having reduced corals health and an algae outbreak.
Now, how much you feed your fish is just as important as how often. Some people feed their fish five times a day and their systems look great. I suspect that they are feeding very small amounts of food, or that they are diligent about exporting waste. Unfortunately, not all reefers are as diligent and they quickly end up having issue related to elevated waste. For those who just cant get corals to grow or color up to the desired level I suggest that you rethink what,how, and when you are feeding.
15. Keep It Simple. The simpler your system, the better. All to often we tend to over-think and complicate our setups. With more components come more opportunities for things to go wrong. Focus on water flow, lighting, and nutrient export. A reef aquarium should be enjoyable and not a job or laborious task. Have fun, and try not to make too many changes at once.
Well, I hope that this list will help reefers, new and experienced. I will be adding to this list from time to time.
Radman73
Valuable Member
I had a few aptasia when I first started out on store bought LR too. I used aptasiaX and they never came back.
Pennywise the Clown
Well-Known Member
- Joined
- May 20, 2018
- Messages
- 613
- Reaction score
- 593
Just after a bit of advice.
A couple of months ago a got a nice rainbow millepora frag. It was doing well with good polyp extension and starting to encrust nicely.
Then one morning I found it on the sand bed. I have no idea how long it was lying there but certainly no longer than 24 hours.
I repositioned the frag but since then it has not been happy at all. Zero polyp extension and the encrusting has completely stopped.
The polyps are just about visible but very tucked in. This has been in this shape for 3 weeks.
Is there anything I can do or is it just a waiting game?
A couple of months ago a got a nice rainbow millepora frag. It was doing well with good polyp extension and starting to encrust nicely.
Then one morning I found it on the sand bed. I have no idea how long it was lying there but certainly no longer than 24 hours.
I repositioned the frag but since then it has not been happy at all. Zero polyp extension and the encrusting has completely stopped.
The polyps are just about visible but very tucked in. This has been in this shape for 3 weeks.
Is there anything I can do or is it just a waiting game?
This really is really great advice, thank you! I have a question on the feed aspect.
It seems most/many folks support feeding fish heavily so the by-products will feed SPS. If not feeding heavily should we then dose certain "things"?
It seems most/many folks support feeding fish heavily so the by-products will feed SPS. If not feeding heavily should we then dose certain "things"?
SeaDweller
2500 Club Member
Light, mainly and N and P waste products from fish are what I rely on.
if not, then you can feed stuff like reef roids or dose NO3 and PO4, I’d rather get more fish and feed.
lilchris_357
Well-Known Member
- Joined
- Oct 15, 2016
- Messages
- 683
- Reaction score
- 346
Toss the rock. Not worth the headache or you could take the rock out, dry it out, cure it and put back in tank. I would not start buying chemicals to try and kill them. Your are going to just spread them throughout your display.
Grill
Active Member
"6. Get the biggest skimmer you can accommodate. I believe that a protein skimmer is one of the most important parts of a healthy reef system. The skimmer I have on my system is rated for 3-4 times more then my system volume."
I'm getting ready to setup a 210 with a 75 sump. I have a Reef Octopus 300int 12" skimmer rated for...
Well Stocked Tank - Rated up to 450 gallons
Medium Stocked Tank - Rated up to 575 gallons
Light Stocked Tank - Rated up to 700 gallons
After watching recent BRS videos I'm not sure this skimmer will work for my system. Any ideas?
I'm getting ready to setup a 210 with a 75 sump. I have a Reef Octopus 300int 12" skimmer rated for...
Well Stocked Tank - Rated up to 450 gallons
Medium Stocked Tank - Rated up to 575 gallons
Light Stocked Tank - Rated up to 700 gallons
After watching recent BRS videos I'm not sure this skimmer will work for my system. Any ideas?
cancun
Valuable Member
I use Chemipure Blue and love it.
cancun
Valuable Member
I would toss it if it were me. I bought some LR from my LFS about 40lbs about a yr ago. I know the LFS employees and they dropped it off at my house. When inspecting the rock, one large piece had some on it, so I tossed it. Wasn't worth the possibility of infecting my tank.
Great stuff...Thank you!
OP
OP
SunnyX
ReefSite.com
Excellence Award
Reef Of The Month
Photo of the Month
Reef Master
My Tank Thread
My Aquarium Showcase
Thank you. After being out for so long I am officially back. I placed an order for actual live rock from the ocean so there is no turning back now.
I look forward to being on these forums with more regularity.
Similar threads
-
- AMS: Article
