Instant Ocean Reef Crystals dKH

jbonez_

Community Member
View Badges
Joined
Jan 23, 2022
Messages
65
Reaction score
18
Location
Michigan
Rating - 0%
0   0   0
So I just bought the Hanna Alkalinity tester and just finished testing it and it is showing a reading of 7.6dKH and my pH is about 8, from the research I've done, I read that Instant Ocean usually has a high dKH of 12.

My tank is relatively new but I want to start testing levels for corals as I plan to start putting some in within the next 3-4 months (give my tank some more time to mature), I plan to mainly stock softies with a few sps. Is there a reason why my dKH would be this low? Should I just continue to wait and see if it raises over time? I would like to see it around 9dKH.
 

dwest

2500 Club Member
View Badges
Joined
Feb 27, 2018
Messages
4,605
Reaction score
9,586
Location
Northern KY
Rating - 0%
0   0   0
So I just bought the Hanna Alkalinity tester and just finished testing it and it is showing a reading of 7.6dKH and my pH is about 8, from the research I've done, I read that Instant Ocean usually has a high dKH of 12.

My tank is relatively new but I want to start testing levels for corals as I plan to start putting some in within the next 3-4 months (give my tank some more time to mature), I plan to mainly stock softies with a few sps. Is there a reason why my dKH would be this low? Should I just continue to wait and see if it raises over time? I would like to see it around 9dKH.
So, you are testing the new seawater or your tank? If it’s the tank, normal alkalinity depletion (corals, coralline algae, etc.) might be the answer. Other possibilities are low salinity and issues surrounding alkalinity testing.

7.6 dKH is perfectly fine though. If it’s relatively stable, I’d be happy.
 

Hugster78

Active Member
View Badges
Joined
Jan 27, 2020
Messages
169
Reaction score
210
Rating - 0%
0   0   0
It’s a cheep salt. Inconsistency with that salt is common. Used it for years. Got tired of brown buckets and dkh swings. Did you make sure to stir the bucket before making a new batch?
 

KrisReef

10K Club member
View Badges
Joined
May 15, 2018
Messages
15,227
Reaction score
31,279
Location
ADX Florence
Rating - 0%
0   0   0
So I just bought the Hanna Alkalinity tester and just finished testing it and it is showing a reading of 7.6dKH and my pH is about 8, from the research I've done, I read that Instant Ocean usually has a high dKH of 12.

My tank is relatively new but I want to start testing levels for corals as I plan to start putting some in within the next 3-4 months (give my tank some more time to mature), I plan to mainly stock softies with a few sps. Is there a reason why my dKH would be this low? Should I just continue to wait and see if it raises over time? I would like to see it around 9dKH.
Do a little water change and see if the dkh rises to evaluate the Hanna results. Old bottles of reagents have been found to produce lower than actual dkh results in the Hanna test.

Otherwise, as mentioned above the growth of coral and calcarous algae can quickly eat up alkalinity from a marine tank.

Figuring out how much is being consumed each day will help you determine how much alkalinity you need to supply each day to your system to keep the dkh stable. This stability is important for keeping coral long term.

Perhaps you can take a water sample to the lfs or have a reef buddy run a test to compare with the Hanna results. :smiling-face-with-sunglasses:
 
OP
OP
jbonez_

jbonez_

Community Member
View Badges
Joined
Jan 23, 2022
Messages
65
Reaction score
18
Location
Michigan
Rating - 0%
0   0   0
It’s a cheep salt. Inconsistency with that salt is common. Used it for years. Got tired of brown buckets and dkh swings. Did you make sure to stir the bucket before making a new batch?
Haven't stirred the bucket, I will do that before my next water change and see if that does anything.
 
OP
OP
jbonez_

jbonez_

Community Member
View Badges
Joined
Jan 23, 2022
Messages
65
Reaction score
18
Location
Michigan
Rating - 0%
0   0   0
Do a little water change and see if the dkh rises to evaluate the Hanna results. Old bottles of reagents have been found to produce lower than actual dkh results in the Hanna test.

Otherwise, as mentioned above the growth of coral and calcarous algae can quickly eat up alkalinity from a marine tank.

Figuring out how much is being consumed each day will help you determine how much alkalinity you need to supply each day to your system to keep the dkh stable. This stability is important for keeping coral long term.

Perhaps you can take a water sample to the lfs or have a reef buddy run a test to compare with the Hanna results. :smiling-face-with-sunglasses:
That's a good idea, I have to go there next week anyway so I'll take a sample there and see what they say, thanks!
 
OP
OP
jbonez_

jbonez_

Community Member
View Badges
Joined
Jan 23, 2022
Messages
65
Reaction score
18
Location
Michigan
Rating - 0%
0   0   0
So, you are testing the new seawater or your tank? If it’s the tank, normal alkalinity depletion (corals, coralline algae, etc.) might be the answer. Other possibilities are low salinity and issues surrounding alkalinity testing.

7.6 dKH is perfectly fine though. If it’s relatively stable, I’d be happy.
Testing my tank water. I'm completely new to Saltwater/Reefing, so you're saying corals, coralline algae, etc could possibly help raise the dKH?
 

dwest

2500 Club Member
View Badges
Joined
Feb 27, 2018
Messages
4,605
Reaction score
9,586
Location
Northern KY
Rating - 0%
0   0   0
Corals and coralline algae consume carbonates as they grow. So alkalinity will decrease as it is a measure of the amount of carbonates (and some other stuff) in the water.
 
Back
Top