Innovative Marine 200EXT Peninsula

[BlingityBling]

Awesome build. I really love IM and the 200 EXT will be my next tank. Any chance of seeing a picture of the section behind the drain where you have the Vortechs mounted? That was always a question of mine is if the Vortech fits in that space and it looks like it does and is working for you.

I have four back there... mp40s... pretty easy to access for me as I modified a stand to fit between the tank and the wall giving me 12" of room for maintainence.
The two in the middle are as high as they can go under the overflow and just fit inbetween the drains. No real room to move them unless they go outside under the returns with the other pair. The two under the return lines would have a good deal of room to move around without the stand I used in the way. Pretty happy with their placement and working well, they just aren't getting good flow at the far end of the tank. Thinking of adding a gyre out there with cables run under the eurobracing.

 

[Viva'sReef]

I have four back there... mp40s... pretty easy to access for me as I modified a stand to fit between the tank and the wall giving me 12" of room for maintainence.
The two in the middle are as high as they can go under the overflow and just fit inbetween the drains. No real room to move them unless they go outside under the returns with the other pair. The two under the return lines would have a good deal of room to move around without the stand I used in the way. Pretty happy with their placement and working well, they just aren't getting good flow at the far end of the tank. Thinking of adding a gyre out there with cables run under the eurobracing.

Thank you!! I will definitely be doing the stand against the wall hiding the plumbing exactly like you have it. Thanks again for the inside view

 

[Evaaron]

Any updates on this thread? Did you end up adding a gyre at the other end? I have this same tank on order and was thinking about running 2 mp60s and 2 mp40s but not sure if that would be enough either.

 

[GGuy]

Any updates on this thread? Did you end up adding a gyre at the other end? I have this same tank on order and was thinking about running 2 mp60s and 2 mp40s but not sure if that would be enough either.

I'm running the same tank. I started with 2 MP60's, but they don't get to the end of the tank well enough. I ended up putting in a Jebao MCP-180 gyre on the end, and that did the trick.

 

[BlingityBling]

Any updates on this thread? Did you end up adding a gyre at the other end? I have this same tank on order and was thinking about running 2 mp60s and 2 mp40s but not sure if that would be enough either.

Yes... Unfortunately no where near enough flow makes it to the end. Also... the MP40's magnets struggle a bit with 3/4 being the max thickness so I'd either go all gyres, or just MP60's over the 40's. I've added the dual Maxpect XF350 as it was recently closed out at half price on BRS. Rare to see that big a discount and never having had a gyre before it seemed a safe gamble. Was looking at the new cloud version, but the cost difference combined with my Apex controlling it for feed, water changes, power outages, etc... couldn't see spending that extra for features I wouldn't be using anyway. More flow than needed, but at least it can all be dialed back now as opposed to blasting for reach.

If I were to have a mixed reef with softies and lps at the far end, I believe it would have been fine but my favorite corals will be the dominate if not only ones put in it being Montis, Acros, Chalices, and maybe eventually a goni garden. So taking it really slowly now and still playing with the gyres to determine what I like best. They do a fantastic job of keeping the glass clean on that end so a partial sand and partial bare bottom mix is working well so far. Already had a monti attach itsekf to the glass unexpectedly. Afraid to force it to move as I'd hate to break it in a bad way.

 

[Devaji]

sorry guys I missed the questions.

yes I agree 2X mp40s are struggling to get the flow to the far end. its odd as the RS 650P I had 2X gyres did just fine for an LPS tank.

this is a FOWLR but still think the flow is very lacking on the far end.
I am going to play around with adding the gyres the the tank.
I was hoping one under the overflow box would do the trick but the magnet just not strong enough there but will hold fine on the sides...its odd.

in other news. I got the tank cycled it's up and running light are up and got 2 QT fish in there.
1st is a black back butterfly its not eating frozen so it feeding on earth worms and littleneck clams.
I got white worms coming in to culture those as well as maasick hope to get it to eat frozen.
the other is a red line wrasse.

in QT I have:
latticed butterfly
bi color angel
flame angel
CB angel

 

[Devaji]

also got a new skimmer. went with the RO int. 200 its a best of a skimmer.
about to order my ATS and CUC for the tank.

i'll try to get some pics/vid of the set up as is. it;s slowing coming along.