Gtinnel
10K Club member
I third these power strips. I have two of the strips and probably 20 of the single outlets throughout my house and love them.
Home Electrical
- Thread starter Chrisz
- Start date
- Tagged users None
Your ATO definately isn't 100W... nor do i think the pH controller is. Skimmer likely isn't either. I have a UPS plugged into 1 outlet (used mainly as power conditioning to protect my apex) and on the UPS i have 2 EB832s (so 16 outlets used there) + 3 non battery backup outlets for lights.... with 300W heater 2 Neptune Sky an XR15 at 70%, everything running i'm at around 1000W total. Considering most of time not everything is going to be running at once or at maximum you're fine to put two 8 outlet or more surge protectors on. If you need extra assurance you can blank off or disconnect the other outlets on the circuit to make it dedicated so no one accidentally plugs in a hair dryer or vaccuum if you're that close to maxing load on the circuit.Rough estimate, I can’t find watts on some so defaulted to 100
braaap
Valuable Member
You have like 600 Watts on that circuit with what you listed. So 5 amps? You aren't even close to overloading.
That said if you can run a 20 amp dedicated circuit to a tank I always recommend it. I usually do that and have a double gang box so 4 receptacles in one box.
That said if you can run a 20 amp dedicated circuit to a tank I always recommend it. I usually do that and have a double gang box so 4 receptacles in one box.
Similar threads
