Hanna Checker caddy - wall mountable 3d printed

[lynn.reef.nerd]

Would you happen to have a file for all 5 checkers (mg, alk, ca, po4, no3) that can be printed?

You found him!

 

[Dreminon]

Very cool. I need to learn how to print and then tell the wife I need a printer for Xmas

thinking about that as well.

 

[RobB'z Reef]

@Lowefx my design is wall mountable or table mount (your choice) but it only holds 3 at this time (pick any 3). it'll handle all the accoutrements regardless of test type. If you are a fusion user you can download the f3d and configure it on your own) I have been considering revamping it this winter to be expandable like a lego block to add as you need with each section dynamically configurable to any type. Any feed back here is appreciated. 2x2, 3x3 what combos? The primary issue is 90% of printers ppl have aren't large enough to print this kind of volume. My thoughts are why bother with a lame flat tray to begin with? for reference here is a link to my design. I don't have a business so all my 3d printed designs are available for free.

Hanna Checker Stand by RobBzReef

Note: I get a lot of questions on how to modify this in fusion using the provided f3d file. Search for my youtube channel (robbzreef) and there is a step by step 'how to' video there. If you find that helpful a like and subscribe is greatly appreciated.https://www.youtube.com/@RobBzReefv3...

www.thingiverse.com

 

[RobB'z Reef]

Just wanted to say thanks! I added a honeycomb modifier so the vials will drain whilst upside down, but fantastic file and appreciate it that you offered it for free.

i don't check back here often since i ditched riches 2 rev but someone hit me up and I was looking back thru this thread. brilliant mod. i often thought about my offset and didn't like it. I think your idea is totes! nice. i may incorporate this into future revisions. ive been thinking about revamping this entire thing to be more print friendly and expandable.

 

[BuddyBonButt]

Printing this tonight lol

 

[Lowefx]

@Lowefx my design is wall mountable or table mount (your choice) but it only holds 3 at this time (pick any 3). it'll handle all the accoutrements regardless of test type. If you are a fusion user you can download the f3d and configure it on your own) I have been considering revamping it this winter to be expandable like a lego block to add as you need with each section dynamically configurable to any type. Any feed back here is appreciated. 2x2, 3x3 what combos? The primary issue is 90% of printers ppl have aren't large enough to print this kind of volume. My thoughts are why bother with a lame flat tray to begin with? for reference here is a link to my design. I don't have a business so all my 3d printed designs are available for free.

Hanna Checker Stand by RobBzReef

Note: I get a lot of questions on how to modify this in fusion using the provided f3d file. Search for my youtube channel (robbzreef) and there is a step by step 'how to' video there. If you find that helpful a like and subscribe is greatly appreciated.https://www.youtube.com/@RobBzReefv3...

www.thingiverse.com

@RobB'z Reef My thoughts exactly. Im new at this, but my thought is if each test was 3 steps vertically (tester, vials, agents), then you can make one for each test (Alk, Ca, Mg, NO3, PO4, etc,) and somehow connect them horizontally (1,3, 5,etc) while still being able to mount to a wall or door. I now have a PRUSA Mini, so you're right, I cant print off one big block. So I must figure out how to design and print each section.

 

[rsach]

@RobB'z Reef My thoughts exactly. Im new at this, but my thought is if each test was 3 steps vertically (tester, vials, agents), then you can make one for each test (Alk, Ca, Mg, NO3, PO4, etc,) and somehow connect them horizontally (1,3, 5,etc) while still being able to mount to a wall or door. I now have a PRUSA Mini, so you're right, I cant print off one big block. So I must figure out how to design and print each section.

@RobB'z Reef expandable option would be great, I would love to print one of these but unfortunately the stage for Ender 3 V2 is not big enough.

 

[RobB'z Reef]

@RobB'z Reef expandable option would be great, I would love to print one of these but unfortunately the stage for Ender 3 V2 is not big enough.

Contact me via email, you can get it off the about page on my YouTube channel

 

[carguy4471]

Contact me via email, you can get it off the about page on my YouTube channel

I sent over an email to see if you by chance have a 235x235 version of this for an ender 3 / ender 6.

Awesome file!! Hoping there's one my size to print.

Thanks for the great work!

 

[JS_racer]

this looks awesome !! saw this on FB from someone that printed it from the files here.. looks amazing !!
so wish I had a printer, or knew some one that could print one
Alk, no3, po4

 

[Perthegallon]

this looks awesome !! saw this on FB from someone that printed it from the files here.. looks amazing !!
so wish I had a printer, or knew some one that could print one
Alk, no3, po4

Hit me up I sell prints

 

[dangles]

What an awesome print!

With the alkalinity option, is there a place for the 1 mL syringe that is a part of that test kit?

Also, did you end up updating the Thingiverse file with the "honeycomb" bottom for the cuvette drainage?

I'd love to get ahold of the file for alk/NO3/PO4!