GoVols: Red Sea S-400

[GoVols]

Installing chamber and put red o-ring in place.

 

[GoVols]

Opening valve, water is rising.

 

[GoVols]

Run at high flow rate for awhile so "The Bag" can catch the tiniest particles on end of output tube in the sump.

 

[GoVols]

15 mins. later at same high flow.

 

[GoVols]

Tiniest of beads have been caught and dialing back towards normal flow.

 

[GoVols]

Down to the tumble and height that I like.

 

[GoVols]

Sit in "Lazyboy" and take the last shot of the night.

Regards, GoVols

 

[GoVols]

Ok,
The Purigen beads have some micro bubbles, in it that they are attached to some of the beads.
So I keep the above swirl flow rate and media height running over night so the attached micro bubbles can un-attach from the beads.
Then I can adjust up the flow one more time to reach the final media swirl and height.

 

[GoVols]

One benefit of running bare bottom.

I do have a Gyre.

So once a week I turn it up to max speed. This lifts out most of the detritus from the live rock pores. It keeps it floating in the water column until it gets caught in the filter sock or comes to a rest on the bare bottom floor. I also use my small mixing pumps at the same time to blow over each rock in all directions but since I have the Berghia nudibranchs in the rock work at the moment. Then I'm only using the Gyre until the Berghia nudibranchs have knocked out all of the Aiptasia.

When I feel like the pumps have done the job over several hours and the water column has cleared then I shut off all the pumps and siphon out the remaining detritus from the bare bottom floor with the python (No Spill) while doing the weekly water change.

If I (still) had a sand bed, it would only turn into a huge sandstorm with this much flow.


Suspended detritus.

 

[GoVols]

Filter sock is filling up with the suspended detritus and skimmer's skimmate is kicking in.

 

[jsker]

Filter sock is filling up with the suspended detritus and skimmer's skimmate is kicking in.

View attachment 543649

You just reminded me, I need to make filter socks, Freddie

 

[GoVols]

@jsker
(lol)
Giving live updates of today's (weekly) reef maintenance routine.

Freddie

---------------------------------------------------------------------------------------------------------------------
Water has come to an almost complete clear. Turn off all pumps, clean filter sock and getting ready to preform weekly water change.

 

[GoVols]

You just reminded me, I need to make filter socks, Freddie

You make your own filter socks?

 

[jsker]

Currently planning my attack after my siesta

 

[jsker]

You make your own filter socks?

Yes sir, at .23 cents a piece

 

[jsker]

My helper, making sure nothing moves

 

[GoVols]

My helper, making sure nothing moves

View attachment 543660

I love your helper!!!!!!

 

[GoVols]

Filter sock and skimmer neck has been cleaned.

Shots of remaining detritus on BB floor.

And "Python" ready to do it's job.

 

[GoVols]

Ok,
Python ready and firing.

Shots of bare bottom floor after water change with the Python sucking out the remaining detritus.

Python done vacuuming the floor but still pulling out water.

And refilling after the water change with 3 - 5 gallon jugs of fresh salt water.

Regards, GoVols

 

[jsker]

My helper, making sure nothing moves

View attachment 543660

Charlie is a hoot!! always with me, day and night.