Going BIG when buying small! My Fluval 22 gallon Dual Display Mangrove Frag Tank!

[KellyCorals]

I found out those hand rail brackets don’t do a good job of holding the weight of the shelf and ATO when it’s full (ATO holds about 3 gallons best I can tell). So I replaced the brackets with a pair I found on eBay that do a much better job.

 

[RyanPlanted]

I really like your tank i also have a coralife UV sterilizer and i want to plumb it into pvc your the only person i can find that has done it so could you please please please give me a link to the place where your got that fittings to plumb the uv into your pvc and also what those fittings are called. it will be much appreciated thankyou.

 

[KellyCorals]

Hey Ryan! So I’ll give you the run down on plumbing the UV sterilizer. If you read my build you have to hack off the barbed fittings and then your left with the threaded fittings. The problem is this - I don’t know what kind of thread they used but it’s not standard pipe thread. What I did (and it worked) was to Teflon tape the threads and force female pipe fittings on a couple threads until they were tight. The threads are not the same but it seals up just fine if you do it right. I’ve been running my tank for 6 months with zero leaks at the sterilizer.

 

[CoralReefTalk]

Hey, I didn't know how to reconnect with you other than to post on the build thread. Here is the video I put together about your awesome nano tank build, check it out, I would love to know what you think of the video.