Focustronic bulk replacement parts thread (Mastertronic / Alkatronic / Dosetronic)

[Darren Caballero]

I’ll also take a pack when you get more needles in. $28 is highway robbery.

 

[socal_48]

Which is why I went and worked to get custom needles made. I will say they cost a bit more than $0.50 due to needing a custom mold.

Btw, I'm considering sourcing a 18g vent needle. This would prevent the need to replace that needle so often and only requiring the main needle to be replaced. I'm not sure why FT decided to use the same needle size when that second one cannot be cleaned w the machine.

Any update on the next shipment?

 

[Biff0rz]

Have you gotten a new shipment in?

I’ll also take a pack when you get more needles in. $28 is highway robbery.

Any update on the next shipment?

Hey all, I'm actively working with the supplier now. We've made some small changes and it has to go back and forth a few times. They are quite busy and have faced shortage issues, so like most manufacturing these days, it's going slower than expected. My apologies. I do not have a good ETA as of today.

 

[Darren Caballero]

Hey all, I'm actively working with the supplier now. We've made some small changes and it has to go back and forth a few times. They are quite busy and have faced shortage issues, so like most manufacturing these days, it's going slower than expected. My apologies. I do not have a good ETA as of today.

thanks for the update sir. I appreciate the time and effort you are putting in to this.

how did the first batch work out? Are they performing ok? I’m guessing the small tweaks were to improve something?

 

[Biff0rz]

Has anyone been able to source replacement inner hoses for pumps a/b/c on the MT?

Mastertronic Pump A, B, & C Inner Replacement Tube

IMPORTANT: Sold individually

www.coralvue.com

Also, a similar question for AT pumps a,c,d, and the MT stepper pump?

Alkatronic Dosing Head Inner Replacement Tube

Alkatronic Dosing Pump A, B, C, or D Inner Tube Replacement Super flexible tubing ideal for the use with Alkatronic dosing heads A. Sold individually as 5" section with end adapters included. IMPORTANT: To be used as dosing head replacement tubing ONLY.

www.coralvue.com

 

[MGarrison]

Has anyone been able to source replacement inner hoses for pumps a/b/c on the MT?

Mastertronic Pump A, B, & C Inner Replacement Tube

IMPORTANT: Sold individually

www.coralvue.com

Also, a similar question for AT pumps a,c,d, and the MT stepper pump?

Alkatronic Dosing Head Inner Replacement Tube

Alkatronic Dosing Pump A, B, C, or D Inner Tube Replacement Super flexible tubing ideal for the use with Alkatronic dosing heads A. Sold individually as 5" section with end adapters included. IMPORTANT: To be used as dosing head replacement tubing ONLY.

www.coralvue.com

Nope...sounds like another opportunity for you!

 

[Biff0rz]

Nope...sounds like another opportunity for you!

Hah!

I'm pretty sure these are Kamoer pumps - you can buy their pharma pump head tubing in bulk.

13.9US $ |1meter Kamoer Peristaltic Pump Tube Pharmed BPT Tube Pipe From Saint Gobain Hose Tube High Chemical Resistance Pump Tubing|Water Pumps| - AliExpress

Smarter Shopping, Better Living! Aliexpress.com

www.aliexpress.com

Replacement PharMed Tube Assembly for FX-STP - Kamoer

Keep your Kamoer FX-STP Dosing Pump system running like new with the PharMed Replacement Tube Assembly. The PharMed tubing will last about 2000 hours of use and should be replaced after that for reliable long-term use. We also suggest replacing the Pump Head when replacing the tubing. What's...

www.bulkreefsupply.com

I'm not sure what the end tips are called but I wouldn't be surprised if amazon has them. Then it's just a matter of measuring and boom, done. Coralvue want's $10ea for a single replacement tube!

 

[robocop1906]

 

[authentic]

Put me on the needle list please

 

[R-balljunkie]

any update to new needles?

 

[DJF]

I am trying to find the replacement silicone rubber sheet. I intend to arch punch them for the mastertronic vial top. It doesn’t look like 2mm is available- will 2.5mm work? (They also have 1.5mm)

 

[sark]

View attachment 2605243

Erick, have you used these tubes on the ak and if you have, how did they work out. I need to replace all my tubes. Thanks in advance

 

[socal_48]

Hey all, I'm actively working with the supplier now. We've made some small changes and it has to go back and forth a few times. They are quite busy and have faced shortage issues, so like most manufacturing these days, it's going slower than expected. My apologies. I do not have a good ETA as of today.

Any new update on the needles?

 

[sark]

Any new update on the needles?

Hey all, I'm actively working with the supplier now. We've made some small changes and it has to go back and forth a few times. They are quite busy and have faced shortage issues, so like most manufacturing these days, it's going slower than expected. My apologies. I do not have a good ETA as of today.

Do you have an ETA on the needles?

 

[dnahas]

Hey all, I'm actively working with the supplier now. We've made some small changes and it has to go back and forth a few times. They are quite busy and have faced shortage issues, so like most manufacturing these days, it's going slower than expected. My apologies. I do not have a good ETA as of today.

count me in.

 

[Biff0rz]

Hey all, still working with this supplier...their factory has been shut down multiple times due to covid

 

[sark]

Hey all, still working with this supplier...their factory has been shut down multiple times due to covid

Thx for the update. This world is . No one wants to work anymore.

 

[yngwie111]

Hey all, still working with this supplier...their factory has been shut down multiple times due to covid

I’m down for a bulk order as well once things are back up and running!

 

[yngwie111]

Also anyone know if these would be a good alternative for replacement or additional vials? The ptfe seems too thick but perhaps replaceable with the sheet from Amazon?

Amber Glass Vial with PTFE Lined Screw Cap ~ 20mL

Borosilicate Glass Vials come assembled with reinforced polypropylene closures and .015" thick PTFE (Polytetrafluoroethylene) liner.

www.sanjosescientific.com

 

[Enderg60]

Has anyone tried the replacement hoses above?

Also anyone know where you can get nicer labels for the reagent vials?