Just used Phosphat-E for the first time. My phosphates had been OK (.03-.05) but then added an auto feeder (Plank). Fish love the auto feeder, but phosphates started creeping up. At 0.09 I decided to add a little Phosphat-E to lower it. Unfortunately, I misread the directions and what I though was a dose to lower it by .01 to .02 was actually a dose to lower it by 100 times that! I dosed 40 ml into a 125 gallon tank. Tested a day later and found a reading of 0.00 (of course). I figured maybe my rockwork would have some phosphate in reserve leaching out that would counteract, so I waited a couple days and re-tested… still 0.00. Corals (especially Montipora and acropora) are starting to bleach out now. I’ve ordered some Neo-phos, but it won’t get here for another 2-3 days. I the mean-time, I’ve shut off the lights (to minimize algae uptake of phosphate and hopefully minimize the corals need for phosphate), started adding a double dose of reef-roads to the tank twice a day (LPS are loving it), and ceased carbon dosing. After doing this for a couple of days, I’m still testing 0.00. Am I on the right track? Any more suggestions to keep the corals alive until the neo-phos gets here? Help!