The sponge will get clogged with the bactria build up and reduce flow through the reactor......
EcoBak Pellet Journey
- Thread starter Shadowramy
- Start date
- Tagged users None
The sponge will get clogged with the bactria build up and reduce flow through the reactor......
OP
OP
Shadowramy
Active Member
Yes, sorry should have mentioned that I heard the sponges getting clogged alot.
it's going to take a few weeks for the bacteria to colonize, he's only had it running a couple of days.
OP
OP
Shadowramy
Active Member
Update 7/10/10
After some thought I decided to load the zeolites into a container and just allow them to site in the sump and move all the pellets to the reactor.
* modified reactor with mesh bottom
* soaked pellets for 24 hours
* move zeolites to container in last chamber of sump
* exit on reactor to the skimmer input
* pellets "dancing" top layer
* GAC Reactor back online
Photos
Reactor I am using
Modified with craft screen
Soaked the Pellets for 24 hour in RO/DI water
Moved zeolites into container, last sump chamber
Reactor Working
Exits to the skimmer
Output at skimmer intake
----
After some thought I decided to load the zeolites into a container and just allow them to site in the sump and move all the pellets to the reactor.
* modified reactor with mesh bottom
* soaked pellets for 24 hours
* move zeolites to container in last chamber of sump
* exit on reactor to the skimmer input
* pellets "dancing" top layer
* GAC Reactor back online
Photos
Reactor I am using
Modified with craft screen
Soaked the Pellets for 24 hour in RO/DI water
Moved zeolites into container, last sump chamber
Reactor Working
Exits to the skimmer
Output at skimmer intake
----
I ordered my EcoBak and Avast media reactor today. I ordered a slightly larger reactor (18") vs stock to hold the full liter of media and still have some room. Going on a 200 gal system.
Sounds like from the last update you decided in favor of discharging to the skimmer vs the display?
Sounds like from the last update you decided in favor of discharging to the skimmer vs the display?
Ricordea
Community Member
Wanted to give this post a bump.
I started this Thursday,and wanted to tell what has happened at my end.As for the Ecobak pellets goes.It's in a old Zeo reactor had laying around.Put the media in their,and it's movement looks like moltening lava.I didn't wanted to crank it up.Or to strip the water to fast either.So far so good.The water seems a lot clearer now.The skimmer has held it's own.The same color and waste is the same.Also some folks mentioned removing filter bags.Well,still using them with no problems.Yet all this depends on one system also.I'm even running the .025 micron bags.Yes that's right a very tight knit bags.I use these because it help me when I clean the panes for removal of any algaes that I clean off.Also still running the PO4 remover also.I'm not seeing the same things that other folks have had.But a newbie also using this media.But haven't scene any draw back either. I haven't had any cloudy water either.So what ever I'm doing seems to be doing just fine.But just need more time,like anything else in the hobby.Always a waiting game for all of us.
I started this Thursday,and wanted to tell what has happened at my end.As for the Ecobak pellets goes.It's in a old Zeo reactor had laying around.Put the media in their,and it's movement looks like moltening lava.I didn't wanted to crank it up.Or to strip the water to fast either.So far so good.The water seems a lot clearer now.The skimmer has held it's own.The same color and waste is the same.Also some folks mentioned removing filter bags.Well,still using them with no problems.Yet all this depends on one system also.I'm even running the .025 micron bags.Yes that's right a very tight knit bags.I use these because it help me when I clean the panes for removal of any algaes that I clean off.Also still running the PO4 remover also.I'm not seeing the same things that other folks have had.But a newbie also using this media.But haven't scene any draw back either. I haven't had any cloudy water either.So what ever I'm doing seems to be doing just fine.But just need more time,like anything else in the hobby.Always a waiting game for all of us.
mshur
Active Member
Guys,
Ive been running bac system for years, starting with ZEO 8 years ago.now i am running pellets for 3 weeks and i notice my REDOXlevel very low comapre to zeovit, prodibio or BW bac systems. I run mix of NP pellets and vertex, they both dif size. output next to skimmer pump, skimmer runs pretty wet mod..for past 3 weeks redox Level around 150 and wouldnt go up. this morning i add air pump to my sump and i already see small shift in the level.
Are you expirience the same low level of redox?
Ive been running bac system for years, starting with ZEO 8 years ago.now i am running pellets for 3 weeks and i notice my REDOXlevel very low comapre to zeovit, prodibio or BW bac systems. I run mix of NP pellets and vertex, they both dif size. output next to skimmer pump, skimmer runs pretty wet mod..for past 3 weeks redox Level around 150 and wouldnt go up. this morning i add air pump to my sump and i already see small shift in the level.
Are you expirience the same low level of redox?
Ricordea
Community Member
I myself haven't tested for Redox levels.I have a 75 gallon sump.With a ton of flow,from the 2 drains,and from the skimmer.I actually have to many bubbles down their,because main pump suck them up to the top.And the 75 is only half full of water. Like
lvsuckerfish
Active Member
I have been using the ecobak pellets for a few weeks now my opr still measures out @ 378 without using a reactor. I have another method to keep mine up with just a air pump and stone. works good to keep it stable in that area for me.
OP
OP
Shadowramy
Active Member
I will be doing more of an update this weekend but after a week I am seeing good results. Colors are maintaining.
OP
OP
Shadowramy
Active Member
Its a good idea to soak them for a day or so, that way they wont float or accumulate bubbles when they are in the reactor.
Rotknee
Community Member
Shadowramy, thanks for brining us along. Great pics and insightful commentary.I am seriously thinking about giving the EcoBak pellets a try. Still undecided as my tank is rather new (4 months old) and can't say I've identified any real problems...yet.
lvsuckerfish
Active Member
my tank is newer then that and I started using them better to keep them low then to have to battle it later. mine are working well for me. I should of soaked them prior but owell they are still working like a champ.
swissgaurd
Well-Known Member
my tank has been running fo r9 yrs now,im really excited about these echoback pellets,ive ordered the pellets and a reactor from avast,just waiting for them to arrive ,hope the reactor arrives first.
my question is ive got some redslime on my sand only,phosphates are undectible with a salifert test kit,so i need to get the phosphate checker to make sure.
now i was thinking of usin the redslime eliminator but not sure,or should i wait and see what the echoback pellets will do for the tank
vic
my question is ive got some redslime on my sand only,phosphates are undectible with a salifert test kit,so i need to get the phosphate checker to make sure.
now i was thinking of usin the redslime eliminator but not sure,or should i wait and see what the echoback pellets will do for the tank
vic
Similar threads
