ylreefer
Active Member
Hey everyone. Just thought I’d post these here to give others some ideas if you wanted to diy something similar.
Not exactly a build thread. But basically I made these with very few hand tools and a dremmel l, so definitely not a high quality finish. But they get the job done.
All the Arcrylic I got locally (Still in Hong Kong at the mo waiting for the relocation back to Blighty) silicon mat and hole punches I got from Amazon.
Each took about 2-3 hrs to make, the larger ones are etched with identifying marks for coral sales for a buddy. That’s done with a dremmel. All cutting was with a dremmel as was sanding. Apart from the fine 2000 grit final before the flame polish.
The Black/Orange was a bit of an experiment when it came to bonding both bits of arcrylic face to face. As you may see it wasn’t the best result. Due to using Weldon 4 copycat bonding lol 4k isn’t available here (Evaporates to quickly) but it was all I have on hand. Will probably use Weldon 16 next time.
The Black/Ice blue one is awaiting an Amazon delivery of silicon mat that I want to add in between this one. I’ll post pic when it’s complete.
Cutting the “Buttons” from the Arcrylic rod was a tedious event due to their precise small size
if anyone wants to know more feel free to ask away. Sharing is caring.
Now. Final project. I.e. experiment. I got to thinking. We all use yellow/orange filter lenses to take nice “real life” colour photos of our corals! So why can’t that filter be apart of the viewing ring? So. I did exactly that. I made a ring with a yellow base plate. Now. Remember this is an experiment. And of course the lense colour is dependent on the amount of blue light. But I think this yellow, or at least I hope this yellow covers 90% of situations. Well that is the plan lol. I’ll test this next week and post the findings. Good or bad.
Not exactly a build thread. But basically I made these with very few hand tools and a dremmel l, so definitely not a high quality finish. But they get the job done.
All the Arcrylic I got locally (Still in Hong Kong at the mo waiting for the relocation back to Blighty) silicon mat and hole punches I got from Amazon.
Each took about 2-3 hrs to make, the larger ones are etched with identifying marks for coral sales for a buddy. That’s done with a dremmel. All cutting was with a dremmel as was sanding. Apart from the fine 2000 grit final before the flame polish.
The Black/Orange was a bit of an experiment when it came to bonding both bits of arcrylic face to face. As you may see it wasn’t the best result. Due to using Weldon 4 copycat bonding lol 4k isn’t available here (Evaporates to quickly) but it was all I have on hand. Will probably use Weldon 16 next time.
The Black/Ice blue one is awaiting an Amazon delivery of silicon mat that I want to add in between this one. I’ll post pic when it’s complete.
Cutting the “Buttons” from the Arcrylic rod was a tedious event due to their precise small size
if anyone wants to know more feel free to ask away. Sharing is caring.
Now. Final project. I.e. experiment. I got to thinking. We all use yellow/orange filter lenses to take nice “real life” colour photos of our corals! So why can’t that filter be apart of the viewing ring? So. I did exactly that. I made a ring with a yellow base plate. Now. Remember this is an experiment. And of course the lense colour is dependent on the amount of blue light. But I think this yellow, or at least I hope this yellow covers 90% of situations. Well that is the plan lol. I’ll test this next week and post the findings. Good or bad.
