Hi , Had an outbreak of Cyano / Dyano and it killed a few of my corals.Being a new reefer it was difficult for me but finally figured out. I am sharing this just in case its helpful for another new bee. 250G system (Display tank 1 - 150G, Display tank 2 - 50G - Sump - 36 and refugium - 29G).
Begining Phosphates - .52
Already had a GFO reactor going on
Weekly 10% water change - irrespective of phosphates issues.
To control the situation :
Added Phos Guard
Increased the water flow in refugium by adding a cheap wavemaker
Changed the filter sock
Observation :
1) after 4 days i removed the phos guard and phosphates were down to .09
2) Macroalgae is growing leaps and bound (more than before).
Algae is significantly down in the display tanks.
Next step :
Holding onto adding chemicure etc as my last resort
continue with husbandry
CHange GFO media (its been almost 4-5 weeks)
Begining Phosphates - .52
Already had a GFO reactor going on
Weekly 10% water change - irrespective of phosphates issues.
To control the situation :
Added Phos Guard
Increased the water flow in refugium by adding a cheap wavemaker
Changed the filter sock
Observation :
1) after 4 days i removed the phos guard and phosphates were down to .09
2) Macroalgae is growing leaps and bound (more than before).
Algae is significantly down in the display tanks.
Next step :
Holding onto adding chemicure etc as my last resort
continue with husbandry
CHange GFO media (its been almost 4-5 weeks)