I wanted an ATO reservoir that fit a weird footprint (5.5" width by 17" long by 12" tall) but cannot find a pre-made one that fits similarly. I have no experience with building with glass or acrylic so before I embark on learning how to DIY build (which would be risky on my end), are there any reputable places to have a custom one built that won't cost me $300+?
Custom Acrylic or Glass ATO Reservoir
- Thread starter nhbegli
- Start date
- Tagged users None
maybe give this a look? https://www.plexiboxes4u.com/acrylic-box-with-top-lid-custom-size
Personally I went the cheap ruote and use a 23 gallon slim jim trash can
nhbegli
New Member
Do you know if these are able to hold water? Couldn't see anything on that. And yeah I have looked all over for the alternative containers or trash cans but none workmaybe give this a look? https://www.plexiboxes4u.com/acrylic-box-with-top-lid-custom-size
Personally I went the cheap ruote and use a 23 gallon slim jim trash can
I couldn't say for sure, for the price i expect they would. Maybe shoot them an email to inquire?
get a 10 gallon at BRS. There is one that is $143 plus shipping.
Solo McReefer
Valuable Member
Those look like they are intended to hold trophies and ceramic dolls
Not water
Custom Acrylic Aquariums, Sumps and Accessories
Manufacturer of high quality acrylic aquariums, sumps and filtration systems; nationwide. Our specialty is in customization of salt/fresh water set-ups.
advancedacrylics.com
Can make a custom sized tank for one
I know how to bond acrylic, and would not trust myself on a water tank to hold water. Let alone on my first try. Overflow boxes, and sump baffles, sure, they're already in a tank there
Good luck
Troylee
all about the diy!!!!!
Ask around your local club if anyone does acrylic… if you were local I’d take care of you they’re simple to build. lol… something that size should run ya like .$150 I’d imagine.
oh my bad. I didn’t check the dimensions. You can find someone that builds them with good diligence. A local glassmaker possibly?
Solo McReefer
Valuable Member
ReefCan Auto Top Off Reservoir (18L)
Maximize Efficiency in Your Reef Setup with the Red Sea ReefCan Space-Saving Vertical Design: Take advantage of unused vertical space in your aquarium cabinet, maximizing water storage without expanding your system's footprint. Clear Visibility: Easily keep an eye on your water levels with a...
www.bulkreefsupply.com
I would try and find where Red Sea sources those water containers from, and buy them for the 20 bucks they should cost
REEFRIED!
Active Member
I have a reservoir with similar dimensions. Mine is 6” wide by 20” tall by 24” long. I designed it to fit behind my stand. However it is acrylic and while not custom made, it is made by an acrylic company and definitely cost me $200!!! The good news is it has a window to see water level, and also has the correct covers and holes in the top for hose/tube and cords.
Maybe. @Tenecor Aquariums could build one or sell the acrylic precut as a side job
Solo McReefer
Valuable Member
Ref: ATO118 - White ATO Reservoir Narrow Fit Version
3"x12"x12" - 1.75 Gal 3"x16"x16" - 3.25 Gal 3"x20"x20" - 5 Gal 4"x12"x12" - 2.5 Gal 4"x14"x14" - 3.3 Gal 4"x16"x16" - 4.25 Gal 4'x20"x20" - 6.75 Gal 4"x24"x24" - 10 Gal (Pictured) 5"x12"x12" - 3 Gal 5"x16"x16" - 5.5 Gal 5"x20"x20" - 8.5 Gal 5"x24"x24" -12.25 Gal View-able front window for water...
advancedacrylics.com
how do you only have 12” of height ?
This would be a small ato container, around 3-4 gallons. You may want to consider having the container outside the cabinet if those dimensions are correct
This would be a small ato container, around 3-4 gallons. You may want to consider having the container outside the cabinet if those dimensions are correct
