beaslbob
2500 Club Member
Thanks for posting.
I am sorry if I misquoted you and could not find the quote. could you pm me? Perhaps I need to edit a post.
Then I would edit this post as well.
my .02
calcium, alk, magnesium diy dosing
- Thread starter beaslbob
- Start date
- Tagged users None
Thanks for posting.
I am sorry if I misquoted you and could not find the quote. could you pm me? Perhaps I need to edit a post.
Then I would edit this post as well.
my .02
Bleaslbob,
no need for the PM and I thank you for the correction, I too could not find the quote to see who it came from. All that is important here is the proper info to the thread. I do appreciate the respose though.
no need for the PM and I thank you for the correction, I too could not find the quote to see who it came from. All that is important here is the proper info to the thread. I do appreciate the respose though.
beaslbob
2500 Club Member
You talking to me? Who is bleaslbob. Certainly we don't hit a key by mistakd woopsies mistake. :wink:
For you and anyone else reading this.
Always always call me out on anything that doesn't make sense, and most especially if I misquote. I am human and do make mistakes. But do want to have the words and quotes correct.
Besides I am not the bestest typer, writer, clearest thinker and so on.
my .02
H@rry
Troll
Just what we need in a rocket scientist! :wink:
lazyreefer
Active Member
In post number 7 it might of been, I was quoting "beaslbob" not "rbursek". I have read the Farley articles numerous times, not being a chemist I get a little bit of informational overload from reading them. However, I've had a couple of questions about limewater that I have asked over the last few months elsewhere, that never really seems to get answered.
How many fluid ounces (or gallons) of saturated limewater can I dump into a 175 gallon system at one time without immediately raising my PH levels more than .2 And is it .2 or .02 and is that percentage points or from 7.8 to 8.0 for example ??
Unless I missed it Farley's article talks about adding 1.2% of total system water in saturated limewater will result in a PH raise of .5 which would not be good. So my math would say that 1.2% divided by 5 equals roughly .25% of total system water of saturated limewater would raise PH by .1 So, if I don't want to raise my PH by more than .2 at any one time, I should never add more limewater than .5% of total tank capacity at any one time. In a 175 gallon system .5% equals .875 or roughly 112 fluid ounces.
My reading of the Farley articles, more than just those two, leaves me with the impression that sometimes my math is wrong, or this chemistry stuff just doesn't work like I think it does. This is why I come out of the shadows and ask these questions. But, if my math is correct I am always confused how some reefers can get away with replacing ALL their evaporated water with saturated limewater - which correct me if I'm wrong, Randy Farley does.
I evap out of that 175 system 2.5 to 3 gallons per day, I can not match that evap rate with saturated limewater or I will be adding more than the 1.2% that Farley talks about as extremely unhealthy for fish. (obviously the PH burn would kill them) Is that a correct assumption ???
Also, if one or 2 teaspoons/tablespoons (no one seems to know :squigglemouth: ) of pickling lime will make a gallon of saturated limewater, does anyone know what the addition of only say a 1/4 teaspoon of pickling lime to a gallon of water will make ?? A gallon of saturated limewater has a PH level of 12 or more, will a weaker solution have a smaller PH level ?? I assume that the slightest addition of pickling lime powder (a pinch) to a gallon of RO/DI will raise that PH level into double digits.
Well heck, I'll just have to get off my lazy keester and find that out myself, ahhhhh the internet, it makes me what I am today.....Lazeeeee
:nerd:
beaslbob
2500 Club Member
beaslbob
2500 Club Member
Lazy
I can't help you with the limewater question. PH is not a linerar function (log type) plus carbon dioxide affects ph as well. So I can't even begin to predict the effect on pH using kalk.
Sorry.
my .02
I can't help you with the limewater question. PH is not a linerar function (log type) plus carbon dioxide affects ph as well. So I can't even begin to predict the effect on pH using kalk.
Sorry.
my .02
beaslbob
2500 Club Member
Lazy,
it is 2 teaspoons for full saturation per gallon of water, PH is logrithmic not leanar. I do not know what the PH would be if you used 1tsp per gallon. You do not add Kalk all at once, it is usually dosed over 24hrs, I use a pump on a timer which pumps for 5mins every 2 hours which pumps in 5qrts in 24 hrs for my evap loss, and my PH runs 8.1 at 2 tsp per gallon.
it is 2 teaspoons for full saturation per gallon of water, PH is logrithmic not leanar. I do not know what the PH would be if you used 1tsp per gallon. You do not add Kalk all at once, it is usually dosed over 24hrs, I use a pump on a timer which pumps for 5mins every 2 hours which pumps in 5qrts in 24 hrs for my evap loss, and my PH runs 8.1 at 2 tsp per gallon.
lazyreefer
Active Member
Thanks guys, I guess I'll just have to experiment.
Similar threads
