Black acrylic / polycarbonate lids

[beatle]

I recently replaced the clear mesh on my Red Sea DIY frame with black mesh. I like it a lot more without all the glare from the light going through the translucent mesh, but the frame is now tweaked from the mesh being so tight, and I'd really just like a nicer looking lid.

I'm aware of several custom lid makers (Kraken, ClearView, Octo, Top Lids) but none appear to offer options with black mesh or a black polycarbonate frame. I haven't yet reached out to all of them to see if these are available. Hoping to find someone who already makes a black lid. I'm not concerned about light penetration. I only run my light at a max of 45% as it is with clear mesh so I have plenty of headroom.

 

[jsker]

I would suggest calling, I bet they can make the lid with the black mesh

 

[beatle]

I've started to reach out to a few. ClearView got back to me already and they don't do black lids.

 

[beatle]

According to their website, Octo does not offer black mesh as they say salt creep makes it eventually look bad. Doesn't make sense to me as I'd just rinse it off.

 

[Troylee]

According to their website, Octo does not offer black mesh as they say salt creep makes it eventually look bad. Doesn't make sense to me as I'd just rinse it off.

There’s no black polycarbonate so that’s outta the question. Black acrylic all day long but it will develop a slight bow over time “fyi”. as for the mesh it’s doable but not everyone is like you and gonna clean it! People would rather complain and get a refund or a discount when they pay all that money for a lid and it turns white lol.. for that reason I see where the companies are coming from..

 

[beatle]

Black polycarbonate exists and is available. Here is just one source:

https://www.mscdirect.com/industrialtools/black-polycarbonate-sheet.html

My existing clear mesh / black frame also accumulates salt, and it gets rinsed as well. Being clear doesn't make the salt invisible. Cleaning is just part of the hobby.

Not sure why they wouldn't at least offer black mesh as an option. It is also not expensive even at retail prices, and it is easy to store for those who want to order it. Perhaps TopLids or Kraken will come through.

I am only aware of those 4 vendors. If there are others, I'll research their offerings and reach out to them as well.

 

[Troylee]

Black polycarbonate exists and is available. Here is just one source:

https://www.mscdirect.com/industrialtools/black-polycarbonate-sheet.html

My existing clear mesh / black frame also accumulates salt, and it gets rinsed as well. Being clear doesn't make the salt invisible. Cleaning is just part of the hobby.

Not sure why they wouldn't at least offer black mesh as an option. It is also not expensive even at retail prices, and it is easy to store for those who want to order it. Perhaps TopLids or Kraken will come through.

I am only aware of those 4 vendors. If there are others, I'll research their offerings and reach out to them as well.

I’ve done clear with black vinyl to hide the machine work… $1500 for a scrap of 1/2” that’s only 2ft by 4ft wow!! Lids would be crazy priced! That lid would cost more than a tank that size haha!

 

[beatle]

That's a great idea with the vinyl. Even if black polycarbonate isn't prohibitively expensive, I think the matte finish of the vinyl will look better.

 

[Troylee]

That's a great idea with the vinyl. Even if black polycarbonate isn't prohibitively expensive, I think the matte finish of the vinyl will look better.

I’ve thought about using all black on the entire thing.. clear is much cheaper and vinyl is cheap! It comes in every sheen and color under the sun lol..

 

[beatle]

Yes, vinyl over the entire frame will definitely be the route I take if I can find a company to use black mesh in their design.

 

[beatle]

Kraken got back to me and they don't offer black mesh or black polycarbonate.

 

[beatle]

Top Lids actually said they do offer black mesh! I did not find it on their website (maybe I didn't look close enough) but they said approximately 50% of their customers choose black mesh. Will be talking with them a little later today or tomorrow about the details.

 

[biecacka]

Any updates?
just curious. I would like to find someone local with an CNC machine to cut my lid cutout. But I’d be interested in seeing your black mesh set up.


corey