Anything Else Needed? (3D Print)

[NowGlazeIT]

Just to double check, the 1.5" is ID correct?

1.5 I can find but I am using 1.25 bulkheads.

 

[Dierks]

but I am using 1.25 bulkheads.

Sorry that was a typo... So you need it to be 1.66" That is very good information to have! I will see what I can do today/this evening and provide you with a CAD drawing.

 

[NowGlazeIT]

Sorry that was a typo... So you need it to be 1.66" That is very good information to have! I will see what I can do today/this evening and provide you with a CAD drawing.

Your the man! I appreciate your help on this. thank you

 

[BantyRooster97]

Anyone have a second to get me a measurement? I need this measurement:

View attachment 1452752

Do you still need this?

 

[Dierks]

Do you still need this?

Just got the measurements!! Thank you so much for following Up!

 

[spartanman22]

Any chance you could make a American DJ Powerstrip cover plate? I have one that is flush mounted into a cutout inside my stand. Unfortunately I free-handed the cut (decided I wanted to do this after the stand was assembled) and its not a perfect fit. A cover plate that overlaps the face of the powerstrip slightly and hides the gaps would be perfect!

 

[Dierks]

@spartanman22 I could, but it would have to be in 2 pieces... I also would have to figure out the dimensions on it so it might be a slow project. What one do you have? You might be in luck as I might have the same one.

 

[Triggreef]

Just finished up helping with a custom 3D print for @KTipp and had a lot of fun doing it. If there is anyone else that needs any help with anything let me know as I am more then happy to help if I can! It did end up costing KTipp a couple bucks for the plastic but I still think it will be overall cheaper then if he would have had ordered the part even if it was still available.

Let me know if I can help as I find helping others on here is just so much fun!

Here is KTipp Project we just wrapped up:
Original Idea:
View attachment 1195267

Final Outcome after he had a few Versions and some time to think about it. Also thank goodness for sketchup as we could see our errors before the print even happened.
View attachment 1195270 View attachment 1195272
I will post Pictures of the final product, unfortunately this is a very large piece (10.5" x 6.5") so we had to split the print and glue, but I still think it will turn out nice!

Yes! Need help... https://www.reef2reef.com/threads/bushings.700812/

 

[Triggreef]

I could send the old ones or maybe even the pump so you can see what it needs. Really just needs a little square with a square hole to lock in the impeller.

 

[Dierks]

@Triggreef Simply send me the measurements and a quick drawing and I will draw it up in cad. Shouldnt be a problem.

 

[Triggreef]

@Triggreef Simply send me the measurements and a quick drawing and I will draw it up in cad. Shouldnt be a problem.

Sweet, I will do that.

 

[BantyRooster97]

Just got the measurements!! Thank you so much for following Up!

Just wondering if you guys came up with a solution for the Apex AFS issue. I want to order some of your corners for the screen tops but I'm waiting to see what ya'll come up with related tot he AFS so I can order all at once.

Thx

 

[Dierks]

I think we have done it! I finally after a few printed have a tight fitting ramp for food pellets to go onto the AFS and extends the feeding range 1 inch. For most people that should reach far enough out into the tank to solve the issues we all are having with it dropping pellets onto the rim of the tank/covers. I will test this out tomorrow but excited to finally have something that looks promising.

 

[BantyRooster97]

very cool.

 

[DesertCitiesReefer]

Looks good keep us posted

 

[Pete Luna]

Looks great Jeff, I am sure everyone appreciates all the time and effort you’ve put into this. I know we’re all isolated more than in the past, but whats up with this guy.

 

[Dierks]

Looks great Jeff, I am sure everyone appreciates all the time and effort you’ve put into this. I know we’re all isolated more than in the past, but whats up with this guy.

View attachment 1482634

haha!! You must not be much of a gamer! That is majora's mask from Zelda. I 3D printed that, and airbrushed it as well. I bet you didnt know I airbrushed did you! I am a jack of all trades, what can I say... ;Wacky

 

[Pete Luna]

No not a gamer, space invaders was my game growing up. Looks cool though.

 

[Mudhen]

Good Morning,

I'm looking for a RED SEA 130D Adjustable Surface Skimmer. Something very similar to the original (RED SEA does not make this part any longer and finding such on the web is nearly impossible now).

Anyway, if anyone is willing to help out with the design of this part I'm confident that it will help out MANY Red Sea 130D owners.

Redirect Notice

www.google.com

Cheers,
Dave

 

[Dierks]

Hey guys, sorry been MIA but the printer has been working hard since Thursday as we were asked to build some parts for Ventilators. Of course I took the job and pushed everyone's projects out as I feel it was something small I could do. so if you have asked me for anything or posted on my thread over the last week I am sorry that you had to wait. i will jump back on tomorrow after I fix my Printer (It wasnt a fan of printing for 4 days straight) and will be in contact with everyone. If I miss you I apologize but simply shoot me a new PM and I will do my best to catch up!

Thanks for understanding!