AIO rear chamber issues

RickvDam

Active Member
View Badges
Joined
Aug 15, 2023
Messages
137
Reaction score
43
Location
the Netherlands
Rating - 0%
0   0   0
Hello! I have some issues with my rear chambers which I believe is due to water level. I currently have my waterlevel pretty high, but this has causes all of my rear chambers to be equally full.

IMG_8701.jpeg

IMG_8702.jpeg


I’ve tried taking some water out if it, and then some more but I feel like the rear chambers continue to stay at the same level. Does anyone have any input on this? I’m trying to install an automatic reef roller but I need to fix my water level first.

This is with less water:

IMG_8697.jpeg
IMG_8698.jpeg


IMG_8696.jpeg IMG_8699.jpeg IMG_8700.jpeg
 

Timfish

Crusty Old Salt
View Badges
Joined
Jul 22, 2012
Messages
4,069
Reaction score
5,391
Location
Austin, TX
Rating - 0%
0   0   0
To get a good surface pull to keep films from building up on the surface of your system there needs to be a drop in the level in the first chamber from the tank level. I would just lower the water level in the tank to achieve this. But you could mess with a large pump in hte last chamber. FWIW, I wouldn't bother with the filter material in the first chamber or with a filter roll. Fish poop is important part of the carbonate cycle as well as providing nutrients for corals.



 
OP
OP
R

RickvDam

Active Member
View Badges
Joined
Aug 15, 2023
Messages
137
Reaction score
43
Location
the Netherlands
Rating - 0%
0   0   0
To get a good surface pull to keep films from building up on the surface of your system there needs to be a drop in the level in the first chamber from the tank level. I would just lower the water level in the tank to achieve this. But you could mess with a large pump in hte last chamber. FWIW, I wouldn't bother with the filter material in the first chamber or with a filter roll. Fish poop is important part of the carbonate cycle as well as providing nutrients for corals.



Hey! I really like my AI Axis so I’d rather not change pumps haha. Yea I think due to my high water level, too much water can get in the rear chambers. I noticed that if I remove enough so the water just reaches the overflow, I get the dropping waterfall idea and my return chamber is lower then the first 2 chambers. I’m guessing that’s the solution. Just remove a few liters.
 

HAVE YOU EVER KEPT A RARE/UNCOMMON FISH, CORAL, OR INVERT? SHOW IT OFF IN THE THREAD!

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top