Last night I did a few bad things inadvertently while all the flow was shut off to catch my newly hatched clownfish larvae…
While the tank flow and return was off, I had the tank covered with blankets to block out light during hatching. Because there was no flow on my heaters and the tank was insulated by the blankets, my temperature spiked from 79 to 82 in about 3 hours. When I started flow back up, the temp was lowered within about an hour to my set point of 78.5.
Also during this time, I took water from the sump to start up my fry tank and replaced it with 3 week old mixed salt water which unbeknownst to me had significantly decreased alkalinity due to aging.
When I started the flow back up and got my first alk result from trident, it was 7.5 dKH! I typically run at 8.8-9.0, so this was a pretty big swing. I made a hasty decision and immediately dosed Alk (using sodium bicarbonate solution) to bring the Alk back up to 8.5. I then programmed my auto dosing to bring it the rest of the way up overnight.
This morning, a relatively new (month old) acro frag was bleached from the base to about halfway up the frag, and by lunch time it was totally white, as shown in the photo. I’m really bummed because the acro was just starting to take off, encrusting the base of the plug.
Is there any chance of this thing recovering? What do you suppose caused it and why is this the only coral that was affected? I have other sps, including 2 other acros that look just fine. I have never experienced such an incredibly fast bleaching event. In the past when I’ve had issues with any coral it has been a pretty slow process of gradual decline.
While the tank flow and return was off, I had the tank covered with blankets to block out light during hatching. Because there was no flow on my heaters and the tank was insulated by the blankets, my temperature spiked from 79 to 82 in about 3 hours. When I started flow back up, the temp was lowered within about an hour to my set point of 78.5.
Also during this time, I took water from the sump to start up my fry tank and replaced it with 3 week old mixed salt water which unbeknownst to me had significantly decreased alkalinity due to aging.
When I started the flow back up and got my first alk result from trident, it was 7.5 dKH! I typically run at 8.8-9.0, so this was a pretty big swing. I made a hasty decision and immediately dosed Alk (using sodium bicarbonate solution) to bring the Alk back up to 8.5. I then programmed my auto dosing to bring it the rest of the way up overnight.
This morning, a relatively new (month old) acro frag was bleached from the base to about halfway up the frag, and by lunch time it was totally white, as shown in the photo. I’m really bummed because the acro was just starting to take off, encrusting the base of the plug.
Is there any chance of this thing recovering? What do you suppose caused it and why is this the only coral that was affected? I have other sps, including 2 other acros that look just fine. I have never experienced such an incredibly fast bleaching event. In the past when I’ve had issues with any coral it has been a pretty slow process of gradual decline.