Hello fellow reefers!
Decided to start a thread to share my journey and track my tank here.
I’m a Brazilian living in Japan, Yokohama. I don’t speak Japanese and it’s been bit of a challenge to shop for the tank equipment here.
Eventually got some from Amazon, Saltwateraquarium.com, Aquacave, Aliexpress, eBay, LFSs, etc..
My tank is a 65 gallon (48”x18”x18”) and will be mostly SPS, maybe will add one or two LPS in the future.
I got a plain tank, drilled, and installed a Fiji external overflow and couple of random flow generator nozzles, one on each side of the tank. Stand is a generic one which matches the tank dimensions.
The sump is another basic small 20 gallon tank (24”x12”x18”) with Fuji sump baffle kit (ended up being very limited in space, but in Japan you kind of get used to that).
It was a nice challenge to put up all the plumbing from scratch, but I think it worked out fine.
The horror scene still around is the cable management ☹.
As for equipment:
Hopefully till next weekend I can add a pair of clownfish .
Decided to start a thread to share my journey and track my tank here.
I’m a Brazilian living in Japan, Yokohama. I don’t speak Japanese and it’s been bit of a challenge to shop for the tank equipment here.
Eventually got some from Amazon, Saltwateraquarium.com, Aquacave, Aliexpress, eBay, LFSs, etc..
My tank is a 65 gallon (48”x18”x18”) and will be mostly SPS, maybe will add one or two LPS in the future.
I got a plain tank, drilled, and installed a Fiji external overflow and couple of random flow generator nozzles, one on each side of the tank. Stand is a generic one which matches the tank dimensions.
The sump is another basic small 20 gallon tank (24”x12”x18”) with Fuji sump baffle kit (ended up being very limited in space, but in Japan you kind of get used to that).
It was a nice challenge to put up all the plumbing from scratch, but I think it worked out fine.
The horror scene still around is the cable management ☹.
As for equipment:
- Return Pump: Sicce SDC 6.0 return pump
- Flow: 2 x MP40
- Light (used the Radion hanging kit and DIYed a support for the Orbit marine):
- 3 x Radion XR15 Blue
- 2 x Current USA Orbit Marine 48”
- Filtration:
- Nyos Protein Skimmer 120
- Red Sea ReefMat 500
- Dosing:
- Kamoer continuous dosing pump for Kalkwasser (from an IceCap Kalk Steerer)
- Jebao dosing pump for All for Reef
- Heating: generic local brand heater 300w
- Substrate:
- Carib Sea bleached rock (40lbs)
- Generic sand (40lbs) from the Philippines
- RODI - Aquatic Life RO Buddie
- Red Starfish PR-100 (from aliexpress) media reactor for GFO and activated carbon
- ATO: Duetto 2 Dual-Sensor ATO
Hopefully till next weekend I can add a pair of clownfish .