3D printing an anemone guard for the Sicce Voyager Nano

[jackadams235]

Trying to find a solid model for two anemone guards for the Sicce Voyager Nano to print, having no luck and I'm not great at designing still. Anyone have a good STL for this?

 

[blaxsun]

In the interim, you can always take one of those fine mesh media bags with a draw string and place it over the powerhead.

 

[cilyjr]

Trying to find a solid model for two anemone guards for the Sicce Voyager Nano to print, having no luck and I'm not great at designing still. Anyone have a good STL for this?

Great opportunity to learn fusion 360.
Watch Lars Christensen videos...

I know your first designs will be clunky and take hours, but I promise you if you stick with it you will be able to bang things out in minutes instead of hours.

 

[jackadams235]

Great opportunity to learn fusion 360.
Watch Lars Christensen videos...

I know your first designs will be clunky and take hours, but I promise you if you stick with it you will be able to bang things out in minutes instead of hours.

100%, I'm alright on Fusion, the problem is this print is for a coworker. I don't have the pump itself in my hands to get any accurate measurements or to do any test fits on, and the specs I'm seeing online are for the entire unit. I saw one other thread where a member designed one and was hoping he could help me out but, no luck when I PM'd him

 

[scuba86]

Trying to find a solid model for two anemone guards for the Sicce Voyager Nano to print, having no luck and I'm not great at designing still. Anyone have a good STL for this?

Hi, looking for cover for sicce 2000.