- Joined
- Aug 14, 2019
- Messages
- 9
- Reaction score
- 6
Hi people of R2R. I got a used leaking 300-gallon deep dimension from a guy on my local Facebook marketplace. I knew that tank was leaking when I got it, so I paid 425 dollars to have the tank professionally resealed. I filled the tank up a week after getting it resealed, and it did hold water. I carried the tank inside filled it up with saltwater, and it only held water for 5ish days before it started to leak. This morning around 3ish pm (give me a break it was a Saturday) , I opened my bedroom door and noticed an electrical burning smell coming from the tank, and that is how I knew something was wrong. The leak was out of the front viewing panel at the bottom. I caught the leak too late; it filled the whole stand and just started to pour onto the floor when I caught it. Inside the stand, I had all my equipment plugged in, some of which were the controllers of my 3 Ecotech MP40s and T5 lighting fixtures, all of which were completely submerged in water. I unplugged the electricity and started to drain the tank into the yard.
I am at a complete loss as to what to do. I got in contact with the person that I paid to professionally reseal the tank, and he said that it leaked because the tank was not perfectly level. I will post pictures below of a level on top of the black trim of the tank. I appreciate any advice anyone could give me as to why the tank leaked. Also, what do you think? Is the tank so unlevel that it would lead to it leaking because even for the one picture where the level is not perfect, I only have to move the level 1mm for it to be perfectly level? Also, is there any hope for my MP40s? 2826 is from front to back and 2825 is from the length
I am at a complete loss as to what to do. I got in contact with the person that I paid to professionally reseal the tank, and he said that it leaked because the tank was not perfectly level. I will post pictures below of a level on top of the black trim of the tank. I appreciate any advice anyone could give me as to why the tank leaked. Also, what do you think? Is the tank so unlevel that it would lead to it leaking because even for the one picture where the level is not perfect, I only have to move the level 1mm for it to be perfectly level? Also, is there any hope for my MP40s? 2826 is from front to back and 2825 is from the length