OP
OP
tbrown
Nominated Cronie Intern - Might be failing?
Alright! Started a print. So far so good. 5 hours left.
125 - Took Forever But Here It is!
- Build Thread
- Thread starter tbrown
- Start date
- Tagged users None
Projects with Sam
5000 Club Member
Partner Member 2024
Hospitality Award
Midwest Reefer
Rock Pool Reef Keepers
My Tank Thread
My Aquarium Showcase
Isn't there one in the archive here?
Because of course you did.
any time you don't lose it all is a win isn't it?
OP
OP
tbrown
Nominated Cronie Intern - Might be failing?
I'm starting to get frustrated because I keep messing with things and thinking I made it better and then everything falls apart...
stoney7713
10K Club member
It happens, I think everyone goes through that stage.
Even now, I hate having to replace anything right now, I got things dialed in and I know as soon as I replace that nozzle or pulley rollers, things are going to be wack again.
OP
OP
tbrown
Nominated Cronie Intern - Might be failing?
Ok... I re-leveled the bed, checked the Z-axis offset at all 4 corners and we're good there. The center is low though???
Anyways, Benchy starts printing good but the front lifts just slightly.
200 degree initial layer
190 degrees after that
55 build plate, I'll try 60....
Initial layer print speed of 10
Print speed 90 after that
Combing mode All?
Fan off for initial layer
Fan on at layer 3
Coasting enabled
What am I missing?
I think I figured it out... For some reason, even with Initial layer speed at 10 the skirt prints at 10 and then the actual object jumps to 100... Weird.
Anyways, Benchy starts printing good but the front lifts just slightly.
200 degree initial layer
190 degrees after that
55 build plate, I'll try 60....
Initial layer print speed of 10
Print speed 90 after that
Combing mode All?
Fan off for initial layer
Fan on at layer 3
Coasting enabled
What am I missing?
I think I figured it out... For some reason, even with Initial layer speed at 10 the skirt prints at 10 and then the actual object jumps to 100... Weird.
OP
OP
tbrown
Nominated Cronie Intern - Might be failing?
Still having some adhesion issues it looks like... And maybe a retraction distance/speed issue... Not stringing but leaving actual strands it looks like.
Try blending the strands with a lower speed that promotes a higher adhesion and the retraction will run smoothly.
OP
OP
tbrown
Nominated Cronie Intern - Might be failing?
Oh yeah, and in reefing news I sold my two frags of Red Digitata. Gotta frag a few more chunks.
Also, the Bubble Gum is getting close to ready to frag. Same with the ROAB. Pink Cadillac nub is encrusting the frag plug. If the Mother regains her beauty, the frag may be sold eventually.
Also, the Bubble Gum is getting close to ready to frag. Same with the ROAB. Pink Cadillac nub is encrusting the frag plug. If the Mother regains her beauty, the frag may be sold eventually.
OP
OP
tbrown
Nominated Cronie Intern - Might be failing?
Only if those are pennies...
I did pretty well yesterday. $70 for the black widow nem and got a free weeping willow out of it! Only a few thousands more before i break even!
That's called making it hail.
OP
OP
tbrown
Nominated Cronie Intern - Might be failing?
I got $10 each for the Digis and $50 for the GSP. Probably could have gotten more but I'm not trying to be greedy, just trying to help support my hobby.I did pretty well yesterday. $70 for the black widow nem and got a free weeping willow out of it! Only a few thousands more before i break even!
The Digis were 3" frags about 3/8" diameter and branching already.
The GSP was a 4" diameter rock but the colony was 10" by 8" by 4".
907_Reefer
2500 Club Member
Not for me!!!!!!!!!!!It's too soon so talk about the GSP
OP
OP
tbrown
Nominated Cronie Intern - Might be failing?
I have GSP. It will be back!
OP
OP
tbrown
Nominated Cronie Intern - Might be failing?
No. I don't really chase Zoas but those are pretty.
Similar threads
