OP
OP
tbrown
Nominated Cronie Intern - Might be failing?
So not the prettiest but it works and I was able to incorporate a couple of frag racks into the design.
Internal refugium - had the library 3D print some hangers for it but they used 15% infill and they broke after about a week. The suction cups just don't hold so I bent some egg crate from the 75 gallon lid and made a stand. It's buried in the sand front and back so it's making contact with the bottom. Has a single frag point on the side middle at the top, a single frag point on the back about halfway up the leg, a 2-3 frag racks on the front middle, and then each front leg has a 1-3 frag rack about halfway up. I'm thinking the red Monti cap will be attached vertically on one leg, the Red Hulk Monti cap in the other leg same way.
I have a Mint or Cactus Pavona that is really close to starting to encrust in the back corner (because the rack is almost exactly where it was already), a ROAB Digitata front and center, the red Monti cap on the "back" front leg, the JKR Golden Gate Galaxea on the front leg, and a Milka Stylo on the top side (at the front glass). I have room for at the most 7 more - 2 higher light medium flow, 1 low light low flow, and 4 medium light medium flow. I can also attach some encrusters on the legs vertically if I so desire, which I will eventually, or possibly some medium/high light medium flow sticks. We'll see. The possibilities are endless!
Until then, it's just ugly, plain old white egg crate.
Internal refugium - had the library 3D print some hangers for it but they used 15% infill and they broke after about a week. The suction cups just don't hold so I bent some egg crate from the 75 gallon lid and made a stand. It's buried in the sand front and back so it's making contact with the bottom. Has a single frag point on the side middle at the top, a single frag point on the back about halfway up the leg, a 2-3 frag racks on the front middle, and then each front leg has a 1-3 frag rack about halfway up. I'm thinking the red Monti cap will be attached vertically on one leg, the Red Hulk Monti cap in the other leg same way.
I have a Mint or Cactus Pavona that is really close to starting to encrust in the back corner (because the rack is almost exactly where it was already), a ROAB Digitata front and center, the red Monti cap on the "back" front leg, the JKR Golden Gate Galaxea on the front leg, and a Milka Stylo on the top side (at the front glass). I have room for at the most 7 more - 2 higher light medium flow, 1 low light low flow, and 4 medium light medium flow. I can also attach some encrusters on the legs vertically if I so desire, which I will eventually, or possibly some medium/high light medium flow sticks. We'll see. The possibilities are endless!
Until then, it's just ugly, plain old white egg crate.
Last edited:
