par

Hello, I am going to be switching from (2) T5's + (2) Kessil A160's to (3) Quanta Pro LED Bars and I am working on how I am going to keep the PAR as close to the same as possible. PAR Meters are very expensive and I cannot find anyone that would let me borrow their meter, so couldn't I...

Selling my ITC Par Meter. Works great, just don’t need it any longer. Free shipping!

I’m selling my par meter with the wand. $300 shipped to the lower 48 perfect working condition. https://www.bulkreefsupply.com/mq-510-full-spectrum-underwater-led-par-meter-apogee.html?queryID=c03abc1ff7421043d68f7ce73df45517&objectID=6096&indexName=brs_prod_m2_default_products

So I have a birds nest coral I believe a neon green. I attached a video of its positioning. That powerhead is a hygger mini wave maker at 60% which is 960gph. The polyps aren’t fully opening anymore when they were before I moved it a couple of days ago. I had to move it to adjust flow/lighting...

So I just put a a360x over my 14 AIO cube. With the filtration in the back it leaves me with a 14” wide x 14” tall x 12” Deep display. The 360x is mounted 6 inches off the surface. I have Seen par charts for this light at 6” and 12” depth. But… the measurements were taken in much larger...

As mentioned, I have the above par meter for rent. Here's the details. $500 refundable deposit upon return of the meter. $25 + support the forum (I believe its $25). $50 if you already support. You pay shipping. $500 to be received before meter will ship. $475 to be returned to you when...

I just rented a par meter today. I went home and played for a few. As I am very confused rn. my light it running at 50% rn. And my par levels about 6 inchs under water are reading around 150 ish range. I’m wondering if This is normal. Plz help.

Im running a red sea 350 (L120xH53xW50cm) with an NSA that im going to have lit with 3 AI primes... Well actually 1x original AI prime HD in the centre and then 2x AI prime 16HDs on either side. Each light is mounted 10 inches from the water surface. My question is, would this setup be adequate...

I just downloaded the Photone app so I don’t have to buy an expensive par meter, only to use it a couple times in a month, but I don’t completely trust the results. I was wondering if there is anybody in south jersey, or around south jersey, that is willing to lend me their par meter, or sell to...

I recently switched from a Kessil a360x + Reef Brite combo to a Ecotech Radion XR15G6. I wanted a more streamlined fixture and the Kessil shimmer was irritating my migraines. I debated about getting the XR30, but I want a mixed reef and told myself the 15 would be adequate if I kept the SPS at...

So what i have noticed whenever i place a small bag of activated carbon in my 100 gallon some zoas ( not all) and some other corals seem to close up a bit. The reason i place the carbon in the first place is to clear up the yellow pinkments in the water. I have read that activated carbon removes...

Hey everyone. I just recently got an AI Prime 16 and tested the PAR on it today. It was a headache trying to research what kind of schedule I should go off of. I ended up sort of mimicking the schedule recommended by BRS. I found the PAR levels they recommended too high for my LPS dominant...

Apogee MQ-510 PAR meter McKinney Texas

I need some lighting pointers after being out of the loop for 5 years or so. We've moved from a 40B (16" height) Now setup a 120g Eurobraced Peninsula Current lighting consists of the following. 4 Kessil A150's, 10k Sky Blue color temp 10am to about 11:30am natural sunlight through high bay...

My PAR is 109 at the pick on SPS level. I want to safely increase it and have a hard time to find the video. I been told that i can use acclimation for it, but it takes the light down. if i need to set the schedule higher and use acclimation right after, what is % i should use on the acclimation...

I'm a complete newbie trying to do it right the first time. I have a 90cm 40watt mariglo light over a 160L rectangular tank and I'm wondering how high it should be to roughly optimise par levels. I have live rock that is relatively close to the ground spanning from one side to the other. Any...

Hi all, My tank is 2ft deep with around 125-140PAR at the sandbed; I have a couple spots I'm looking at. I'm looking for suggestions for corals than would do well down there. I'll most likely put them on a little standalone liverock "island". The flow is pretty high in one location and...

Hi can anyone give me up to date information on lighting par levels for Gonipora… Information I’ve been finding is old….. Want actual numerical values please and not just low to medium lighting….. thanks in advance…. Found some saying 40-125 par others 150 to 200par….

Hi, planning out my build for the new house. 235g display, 300g stock tank sump with a standard 75g and a 42"x42" frag tank sharing it. Sps dominant with a few encrusting lps (leptos, cyphastrea, etc.). Using the LEDs from my previous tank in a new hybrid fixture (61" Aquaticlife Hybrid...

Looking to see if anyone has one for sale or knows of a site that isn’t out of stock. I can’t seem to find one anywhere. Thanks in advance!

Hi all, I'm getting my first Bubble coral tomorrow and am trying to decide placement. I have a couple options, both with relatively low flow. And now it's come down to light level. What PAR level should I aim for with a Bubble Coral INDO? Thanks!

Bulk Reef Supply essentially does the PAR meter rental where you can return the meter within 60 days for their $100 restocking fee. But I was also reading the reviews and most people said it was useless without the handle, which is $70 to own and can't be returned like the meter I don't think...

Is 150 PAR enough for a derasa clam? The spot that I’m looking at is around that PAR level with an AI prime.

Hi all, I will give some more details to the title. I recently started my adventure for the first time with saltwater aquaristic, so I have no N years of experience for supporting my claims. I come from freshwater, and before that terraristic (bearded dragons, newts, frogs etc) and a common...

Wanting to switch my light program to the BRS recommended for LPS dominant tank. Not happy with my current program as it has too much white, and far too many data points to adjust the white. In addition to the white light I'm needing to increase the PAR after testing, as I found the bottom was...