I have been inspired by BRS’s recent video on Kalkwasser mistakes and they mentioned that a dosing method for adding Kalkwasser is a good way to go vs ATO.
My question is two part. Based on my limited experience with Apex Dos and Trident
1. Can I fully automate my Kalk dosing. Program it to...
Hey guys I recently started using kalk I’ve had kalk+2 for the last few years but never actually used it before till last week
the goal was to stop my 2 part dosing at night and add the kalk to keep my ph higher at night then again my high is usually 8.4-8.5 and low is usually 8.1-8.2 so i wont...
Which pump is best/easiest to use and maintain parameters? From my understanding the X1 only allows dosing 12 times a day while the X1 Pro allows dosing 24 times a day. We have a 125 gal display and a 40 gallon sump with about 110 gallons of water total, minus rock, sand, refugium, and all...
I use an Avast K2 Kalk stirrer and a peristaltic pump to feed kalk to my system.
One thing I'm not sure about though, is when to run the stirrer in relation to the pump? Should I run the stirring before running the feed pump, after running the feed pump, or during the feed pump run?
I can see...
Hi there, wanna share this experience to find out if anyone had the same issue:
I have been dosing kalk nearly 2 months in the new 100G tank for keeping up Kh and Ca levels (pretty stable) i was dosing 20/25 drops per minute (nearly 2 liters of Kalk in 24 hours) i then switch off the Kalk for a...
I currently use BRS two part hybrid tropic marin. So, i dose brs soda ash, brs calcium chloride, and tropic marin part c. Then i add the tropic marin trace elements.
Im looking for ways to increase my ph i currently have my protein skimmer pulling in fresh air from outside. Which has raised my...
Hi there,
I will be setting up a kalkwasser stirrer tomorrow for my 180gal after years of simply having 3 parts supplement my tank. I was wondering if anyone had a calculator for how much should I be dosing considering I've got a 0.9 ish DKH consommation per day. I found a few calculator but...
Need help figuring out what to do on my next build and what equipment to run. Currently I mix kalk in a 5 gal pail then transfer it to my ATO. It keeps my Ph, calcium and alkalinity stable. I’ve been considering a calcium reactor but my pH is already low 7.8 and I’ve heard they can lower pH. Can...
Hi a few days ago I started dripping fully saturated kalkwasser into my 50 gallon and my phosphates have been at 0 since. Im currently dripping around 3ml/min. Before I started dosing I was consistently at .03 ppm using only a large skimmer. Is it possible for the kalk to drop my phosphates so...
Reefer 250 around 18 months old.
Finally getting the hang of keeping sps. So I got rid of a big monti and went crazy with the sticks. This thing will be packed if I can keep everything in line. I've got 9 more frags to find spots for. I can't wait for these to take off!
Hi,
I have been using Kalkwasser for a while and like it. I recently purchased a large tank and now keep my Kalkwasser in a 20 gallon bin ( I was getting sick of replacing it as I go through a lot). Still figuring out my actual consumption, but I get at least a week without having to replace...
Hi everyone.
So I got my hanna test kit today to move from my regular dosing to just using kalkwasser with an ATO. My calcium is at 483 and alkalinity is at 7.2 which is alright for me alkalinity could be raised a bit but 7.2 is really fine for me. Should I allow my tank to go for a week...
Hi everyone,
I am trying to get everything ready to leave my tank at my parents house when i go to school in the fall. I want to get an auto top off for sure, but I don’t know if I want to get an auto doser. I have heard many people that have had great results topping off with kalkwasser mixed...
Two Little Fishies Kalk Reactor. This thing has been collecting dust for sometime now. I’ve converted all my systems over to 2-part so I have no use for anymore. I’d like to get $45 out of it. I’ll pay for the shipping.
My tank is getting to a point where it uses more calcium than I can supplement via adding kalkwasser to the ATO water. I've seen where most people just set up a constant flow of RO water through the stirrer but I'd just like to set up a constant flow doser to suck tank water and pass it through...
My alk Rides between 7- 7.6 and calc around 420-430. I have been using kalk in my ATO to maintain calcium and alkalinity levels and my SPS have been growing nicely but I feel like its not as stable as it could be. My 75g evaps about 1 gallon/day. I like the idea of adding 2 part to get my alk up...
After a previous thread, I have concluded that I will use coral coloration abcd from redsea. Since magnesium is basically always added separately, what is left is pH, Alk, and Ca. The methods for adding this that I found are kalk and 2part.
Based on what I learnt, kalk also helps reduce...
Since my calcium reactor cant seem to keep up with my alkalinity needs, would it be feasible to dump some kalk into my saltwater container? I've implemented automatic water change of about 7500ml/day. Would there be issues like clogging the lines, burning up my DOS, screwing up the chemistry?
Provided there is enough kalkwasser in a stirrer, is the liquid in the kalk stirrer maintained at 100% saturation?
If it is, does it matter the amount of kalkwasser you add to the stirrer? The slurry just reducing slowly as fresh RODI is added via the ATO until you need to add more Kalkwasser?
I am in the process of deciding which Kalk dosing method to use. I am leaning towards the Avast line of stirrers. From what I gather I can add a few teaspoons of Kalk and that should last me a few days, hopefully 1-2 weeks based on evaporation amount and Kalk added to stirrer. Id prefer this...
I’m have a nano tank about 1 year old. Starting to add some Lps frags and and a small frags of Monti Cap few weeks ago. I have not seen much drop in Alk, Cal, Mag. Is that because frags dont consume that much of Alk,Ca, Mg. I am looking to add in 2 acro frag into tank, just for starting...
Hello!
I'm looking for a Avast kalkwasser reactor, new or used, as long as the motor still works and it doesn't leak.
Shoot me a message with a price and pictures if you have one you'd like to part with.
Thanks!
Hello everyone, I have a reefer 350 and I wanted to try out a small DIY project on my sump. I don’t know exactly how to go about this so I need some help. So I was looking at a YouTube video on the BRS page on Kalkwasser. Here is the link . So I had an idea, on the video aound 8min 15sec...
I am newer to reefing (about 6 months). I want to start trying to keep some SPS corals in my tank, Ive been successful with softies and a few LPS corals. I have a 40g IM nuvo fusion. I've been keeping track of my elements the last few weeks, and have very little swing (i'm guessing that is...