fluval evo 13.5

  1. JamesTh

    Nano Build Fluval Evo 60L/14.5G to WB 25 peninsula

    Hi, I started cycling my tank a few weeks ago now, and it's still going through the cycle. I've been ghost-feeding, and adding startup bacteria, along with almost daily monitoring of Ammonia, Nitrites, pH, and KH. I plan to have a mix of Softies, and LPS in my reef tank, along with some...
  2. justslothy

    Nano Build Slothy's Evo 13.5 Mixed Reef Build

    Hey all! I've never posted a build thread but always wanted to. Been deep in and out of the freshwater hobby my whole life and have dabbled in keeping a FOWLR system in the past, but I'm ready to graduate on to the world of reefing. I decided I'd go with something small that can easily be moved...
  3. N

    Hello Newbie

    Just joining the group. I have a new EVO 13.5. I had a saltwater tank many years ago, since then mostly fresh water tanks. Right now I have 2 40 gallon breeder tanks. Planted community tanks. I may in the future think about converting one to a reef. But for now, just want to the get the...
  4. I

    Anyone know what this is? it came in on my frag of zoas.

    it wasn’t this big when i got it. it just kept growing more and more till it got to this size. and to be completely honest, i kind of like it and would probs prefer it to be on its own with no zoas.
  5. I

    Hello refugium in 13.5 3rd chamber.

    sup i have a 13.5 evo new setup 2 lightning maroon clowns and a refugium in the 3rd chamber. why do i never see one in the 3rd one
  6. djm

    Fluval Evo Lid

    Hi all, can anyone help me with where I can get a replacement lid for the fluval evo? Mine has cracked and the corner portion has come away. I’ve looked on the fluval website and they are available in the US but I can’t seem to find anywhere in the UK where you can get a replacement part. thanks,
  7. Apayson

    Nano Tank | Sump upgrade | Skimmer or refugium?

    Hi Y'all I'd appreciate your advice on the next steps I'm about to take on my 13.5 gallon tank. My sump has inadequate filtration & I'm wondering if I should upgrade my sump chambers to have 2 media baskets...or go with a skimmer or refugium in one of the chambers. Images are attached below of...
  8. CrazyDuck959

    Build Thread Fluval Evo 13.5 (First Saltwater Tank)

    Hello, I am gonna go ahead and start my Build Thread. As of the start of this post this tank has been up for around 7 months. It is a Fluval Evo 13.5 AIO Tank. This is my first saltwater tank. So I am learning as I go. I decided to set up the fish tank on my desk next to my computer (Picture...
  9. Baldee

    Nano Build Starter Tank

    I received my first saltwater tank (Fluval Evo 13.5) earlier this year (2022). It took me a few months to get the courage to start setting it up. After it was cycled, I started stocking it (not all at once). I currently have: 1x clown fish 3x blue legged hermit 2x nass. snail 1x purple torch 1x...
  10. H

    Fluval EVO 13.5 Gal Setup

    Hey all, I am new to reef tanks and since I live in a compact space for the moment the fluval EVO 13.5 is all I really have room for. I know it is going to be harder to upkeep than a larger tank would be but I have to make do with what I have. I am currently running everything stock. Other...
  11. islandstonashville

    Build Thread My first Saltwater and Nano Tank.

    Nano Tank build is UP! I will be testing parameters today before introducing bacteria and ammonia. So far Salinity is 1.026/35ppt, Temp 78.4F. Overall excited how far this hobby will take me. I can’t wait to see some livestock in the tank. Heater: Cobalt Neotherm Pro 75W Pump: Sicce 1.0 Media...
  12. CrazyDuck959

    Upgrades for the Fluval Evo 13.5

    Hello! I am sorry if this has been asked before. But I’m trying to find a good new light for my Fluval Evo that has either a regular timer or a Bluetooth timer. My schedule has been changing a lot recently and I always end up turning the lights on and off at random times. I would like to have...
  13. tadrielobrien

    King of the hill- Can nuisance algae be managed by increasing coraline algae load?

    I began my reef hobby nearly 6 months ago with a 13.5 Fluval EVO, and I've had great luck with it thus far (knocking on all the wood available). So far the only major problem I have encountered was a salinity spike that nearly killed my hammer (Beginner mistake- I relied on a cheap hydrometer)...
  14. murphy’s reef

    Fluval evo 13.5 upgrades

    I am new to the saltwater hobby , I have a evo that’s has been set up for about 3 months now. I am now looking to make some upgrades such as lights ect. Just not sure which ones i should focus on first. Also what would be the best anemone for this tank and would i need upgraded lights ? I just...
  15. CrazyDuck959

    Fluval Evo 13.5 - Fish Stocking

    Hello, I have a Fluval Evo 13.5 and I'm quite new to saltwater fish tanks. I’ve been doing freshwater tanks for years now but I thought it was time to try out saltwater. I wanted to do something minimalistic which is why I went with the Fluval Evo 13.5 but since I’m new to saltwater I’m not...
  16. PinkSango

    Build Thread Fluval Evo 13.5

    This was taken 1/22/22 and I've since moved the mushrooms to the rocks in my tank as I read that they prefer to be on rocks and not in sand ;Cat My tank has been up since Sept. 2021, and I got the coral on Friday 1/21/22
  17. PinkSango

    Hello Hello from Ohio!

    Hello everyone! Just wanting to introduce myself here, my name is Reichel (Rachel) and I setup my first reef tank (fluval evo 13.5) in Sept. 2021, now I have a clown fish, an orchid dottyback, an emerald crab and a nassarius snail! I have a cabbage leather coral and two green striped mushroom...
  18. Petrichor

    Removing xenia, killed my goby? How to proceed?

    I removed some rock from my Fluval Evo 13.5 to scrape off some pulsing xenia and then three days later my hectors' goby is dead. Did I do something wrong that contributed to his death, or was it just a fluke? Here's how it went: I removed the xenia with a razor blade, rinsed the rock off with...
  19. InvertGang

    I 3D Printed a Fluval Evo port cover!

    Yesterday I got this little guy. I already had something covering the feeding port from when I got my hi-fin banded goby, but it didn't look very nice. I had more magnets holding it down before, but I had to borrow some to do my 3D print. I designed a new port cover using 3D modelling...
  20. Mr.mussa

    Tank swap question

    Hello reefers, I currently own a fluval evo 13.5(been running since June 2021) and I wanted to upgrade to a waterbox 20. If I add all my live rock, bio media and some tank water from my evo to the cube 20. Will the cube 20 still cycle/mini cycle? Thank you and happy reefing!
  21. rantipole

    Tankmate for Territorial Clownfish

    I have had my 13.5 gallon Fluval Evo AIO for about 4.5 years. I've had a pair of occelaris clowns since starting the tank. Recently, the large (almost 4 inches) female started bullying the male and, I think due to the bullying, he jumped out of the tank. I recently added a small clown and the...
  22. lukefish

    NSW…. Discuss

    Just come across a website in the UK that will deliver natural sea water to your door. Price aside, would you convert your tank to use natural sea water? my main worry is their source and contaminates…. But they claim to supply to London Zoo, amongst others. what could go wrong?
  23. Reefing Reefer

    Nero 3 Schedule

    I’ve been running my AI Nero 3 on my Evo 13.5 for about 6 months now, but I’ve never been content with the schedule. I started tinkering with my old equipment (I ran an Aqamai KPS prior) and decided to run them both. I remember having success with the preset schedules and decided to match my...
  24. Jubal_Harshaw

    I need some advice

    I am new to the forum, and I need some advice. I have a Fluval EVO 13.5, and it is FOWLR. It is cycled for about two weeks now, and I was thinking of starting a reef in October or early November. Now here are some questions I have before I convert the EVO to a reef: • I live in a rented...
  25. Reefing Reefer

    Nano Build Evo 2.0

    After a moving disaster in March, I'm ready to make progress with my Evo Nano Reed. Update: Shortly after I lost all my fish/corals in my move, I started from scrap! I gave the Evo a thorough freshwater bath and scrub. This time around, I wanted to do things a little bit differently, the...
Back
Top