I have a 75gallon tank set up for about 2 years. sump has live rock, and so does the tank. Nyos120 skimmer tht only skims less than 1/2 the cup like every 10 days before I clean cup. growing Cheato. Using filter floss I clean every week or so. Refugium light is on for 8hrs and use Rodi water...
The Ways Alkalinity can Accumulate in a Reef Tank
@Miami Reef
"Why is my alkalinity rising?" is a seemingly simple question that consistently pops up in the chemistry section of Reef2Reef. However, it is a complex question since there are numerous ways alkalinity can accumulate - some ways one...
I currently dose 1mg kno3 and 0.04mg kpho3 weekly but since it's weekly i often forget to do it, sometimes a couple weeks in a row with visible degradation to acro health, so i want to automatically dose it. I only have one channel free on my kamoer dosing pump. Can i mix potassium nitrate and...
I was doing tests on my tank and it came back with my alk at 17dkh and my calcium was 500
all my others are normal with ammonia and nitrate at 0 and nitrite at 10
Im not really sure what to do i have been dosing reef carbonate to my tank twice a week to boost growth of the corals i have and i...
I’ve been in the reef game for a long time, but took a break for a while and just recently got started again. This time around I’m trying to make sure I really stay on top of water parameters, so I’ve been testing regularly.
I started this time with a used tank from my dad, a Red Sea 350 and re...
Is it possible to dose phosphate during the optimal period of the daily photo cycle, based on the best time corals are known to absorb phosphate from the water? Then to keep it from climbing, and reduce the time spent monitoring, remove the phosphate daily, with a GFO reactor on a timer, running...
I have a question about NO3 and PO4 chemistry. Usually when PO4 drops NO3 would drop with it right? I've been having problems keeping PO4 up, so far I removed pellet reactor and disconnected the refugium. But as soon as I turn the fuge back on the PO4 drops too fast, is it possible that the...
I've heard about the problem of Hanna's Magnesium colorimeter reading high and recently learned that you can fill out a form on the Hanna website to get them to send out a new Reagent to correct the issue. But has anyone not had to do this and is getting similar results to other tests they do? I...
Why are magnets bad for the reef tank?
I have read many threads where individuals blame magnets for all kinds of misery. I am getting ready to make some magnetic accessories for my tank but I want to be prepared for my consequences if I fail to adequately protect them from poisoning my tank...
Hi,
Today did some testing and I found that my alkalinity is pretty low.
dKH: ~6
Ca: 470
Mg: 1440
Salinity: 1.025
pH: ~8
Nitrate: ~6
Ammonia and nitrite: 0
These testing results are 1 week after a water change. I use Tropic Marin Pro salt and a new batch of water has around 7,2 dKH. Should I...
Hey guys once again battling algae… started dinox last night and it says not to add trace elements and no products that absorb. My tank is ultra low nutrient and I want to add Neonitro to help battle the Dino’s. Can I do both at the same time?
So I accidentally bought the Hannah iodine tester for freshwater and have been wondering how I could safely dose to the reef tank without an ICP test. I was thinking I could add iodine to an ATO or mix it in my freshwater and then test prior to adding salt to achieve .06 iodine levels.
I'm not...
Happy Holidays Fellow Reefers,
Here’s the skinny… I have a Coral/Invert QT with a few frags in it, nothing flashy, couple of smallish rocks, frags, and some snails. Nitrate & Phosphate are consistently reading 0, everything seems happy, save a temperamental Kenya, but otherwise good. My...
I just got my results back. I took my sample the same week that I started a chaeto reactor so know my nitrates and phosphates will come down, but am concerned that my nitrates are 135x my phosphates instead of about 10x like I see being ideal. I’m thinking of starting to dose NoPox but am unsure...
alright - I'm stumped on this. Tank is 3 months old, PH is between 8.1-8.2, Salt is at 33, MG is 1240, Calcium is 480 and Alk keeps creeping from 11 into the 12's. It got as high as 14, with Ca and Mg relatively the same. If I do a 30% water change, Alk drops some, I was able to drop it from the...
Howdy!
Hopefully an appropriate place to post.
I've noticed over the last week or so my Alk has started to swing a fair bit from low of 8.46 to high of 9.05 with my set point 8.6
I've adjusted the dosing baseline to the average over the last month and just today increased my testing from 4/2...
Hi all,
So I'm thought I might grab a few gallons of Pacific Ocean water to add to my tank over time. I have a 150g tank using Instant Ocean reef crystals.
The water won't be taken near a marina or any known pollutant type areas.
Has anyone had experience supplementing their tank in this...
Hello,
I got a pulsing Xenia about 4 ish months ago, and up until the last month and a half it was doing well and pulsing like crazy. Now the polyps are skinny and not as puffed up without any pulsing whatsoever. I have also been battling prorocentrum dinos and now have a forest of GHA however...
Since I’ve added some Zoa frags to my tank, I’ve had wild swings in dKh and PH in my Fluval 13.5G tank. I know with a small tank, this can occur, but any advice on how to stabilize this?
No ammonia or nitrite
Nitrate is between 5-10 ppm
No detectable phosphates (only have API kit so might not...
Heres what happened, Im fighting dinos, specifically procentrum, and I started dosing silicates. I used sponge excel, and dosed 5 drops into 10 gallons. The drops did harden upon contact with the water and turn into white flakes. I know that silicate based solutions are caustic to humans, but...
Really confused about a couple things. First I did a water change in my 45 gallon tank after I notice I have no nitrite ammonia Is .25ppm which I read means 0 since it’s an ati test kit. My issue is the nitrate is light orange so in between 10-20ppm. Second day I checked and still hasn’t really...
Tank info:
Currently battling dinos and am making decent progress due to more hair, coraline, and film algae showing up.
In range of reef tank parameters apart from phosphates which are elevated to encourage Dino competitions.
Description: this algae looks like brown dots, and i can’t blow it...
What would cause quite a big DKH drop and a raise in magnesium? The last time I dosed was a week ago, and it was Sodium bicarbonate for the alkalinity. I tested alk 2x to make sure...same result. I'm confused and worried.
I'm just curious about sea salt. I'd like to know more in depth of why it's not good to use sea salt that has moisture in it to use it in a fish tank. I'm a little confused because it gets wet/ dissolved into our aquariums and I'm pretty sure alot of salt on the market comes right out of a wet...
I can't seem to raise magnesium, I am worried that if I put anymore in that maybe the levels will come up overnight for some reason? Pls help not sure if I am wasting my 2 part magnesium mix. My levels at the start of the day was 1140 magnesium, it is now at 1185. Can't seem to get it to 1200.