What hanna checker should i get?

[vcnt]

I currently have the api master saltwater kit (ph ammonia nitrite nitrate) and i am thinking of picking up a phos checker, as i dont have any coral yett, so i dont think i need the coral element testers. Do i get phosphate or phosphorus?

Also, My tank is about 3 weeks old and nitrite wont go down, is this an issue or faulty test kit?

 

[Spare time]

The ulr phosphorus is the most accurate but you need to convert the number into ppm with a chart hanna has online. The phosphate ULR is probably the most common.

Also you can ignore nitrite as long as you have no ammonia.

 

[Randy Holmes-Farley]

A good alk test is the first priority, but it need not be Hanna.

 

[vcnt]

A good alk test is the first priority, but it need not be Hanna.

Is Salofert better? or red sea?

 

[Randy Holmes-Farley]

Is Salofert better? or red sea?

I don’t know if Salifert is better or not, but it’s certainly good enough.

 

[jeffmr4]

You might try doing a water change for the nitrite. Your cycle could have stalled if it is high.

 

[exnisstech]

For me the Hanna testers are easier than trying to read a color change. I use ultra low range phosphate, hi range nitrate and alkalinity. That's all I test on my weekly testing. I use salifert to test calcium every few weeks. The Hanna calcium checker was too complicate IMO

EDIT: are you showing any nitrate? I don't own a nitrite or ammonia test. Right or wrong what works for me when cycling a tank is to watch for nitrate. When I see nitrates I slowly start adding livestock.

 

[vcnt]

You might try doing a water change for the nitrite. Your cycle could have stalled if it is high.

I did a 15% last week , another one is tomorrw. my nitrite is a dark purple

 

[Randy Holmes-Farley]

I did a 15% last week , another one is tomorrw. my nitrite is a dark purple

IMO, that is irrelevant as long as ammonia declines rapidly to low levels.

 

[Tavero]

I currently have the api master saltwater kit (ph ammonia nitrite nitrate) and i am thinking of picking up a phos checker, as i dont have any coral yett, so i dont think i need the coral element testers. Do i get phosphate or phosphorus?

Also, My tank is about 3 weeks old and nitrite wont go down, is this an issue or faulty test kit?

ULR Phosphate and ULR Phosphorus Hanna checkers are using exactly the same methode and chemicals. Doesn't matter which one you get but the phosphate one is more convenient because it does the calculation for you. I would get the rest of the tests from Salifert. They are cheap but accurate.

 

[jeffmr4]

IMO, that is irrelevant as long as ammonia declines rapidly to low levels.

I guess I left that part out. As long as the bacteria for ammonia have been established..

 

[thedon986]

The Hanna Holy Trinity
HI 772 Alkalinity
HI 774 Phosphate ULR
HI 782 Nitrate HR

 

[dr_vinnie_boombatz]

I have all 5 and the only one I do not use is magnesium. I use Randy's method of ICP.

Recommend:

ALK 772

Alkalinity DKH Colorimeter HI772 Hanna Checker - Marine Water

Why does BRS recommend this? The Hanna Alkalinity checker is an awesome little tool that now will give results in DKH values that are much more common in the aquarium hobby. It will also give you accurate easy to read results with the large LCD display. We like the repeatable results and ability...

www.bulkreefsupply.com

PO4 HI774

Phosphate Ultra Low Range PPM Colorimeter HI774 Hanna Checker - Marine Water

The HI774 Ultra Low Range Phosphate Checker® is a cost-effective way to measure phosphate in marine systems, including reef tanks. Excessive phosphate levels can prevent calcification, skeletal formation, and growth of many coral species, particularly those referred to as SPS or small-polyp...

www.bulkreefsupply.com

NO3 HI782

Nitrate High Range Colorimeter HI782 - Marine Water

The HI782 Nitrate Checker HC by Hanna Instruments is a simple and accurate handheld colorimeter that uses the zinc reduction method to determine nitrate concentration in marine applications. With a digital read out, there is no more struggling to determine colors visually. The HI782`s high range...

www.bulkreefsupply.com

CA HI758

Calcium Colorimeter HI758 Hanna Checker - Marine Water

Redesigned with new 100 µL Pipette Accurately check your reef tanks calcium level with the Hanna HI758 Calcium Checker. Three simple steps to results. The Hanna Calcium Checker bridges the gap between simple chemical test kits and professional instrumentation. Accurate, affordable and easy to...

www.bulkreefsupply.com

+
HI70436

Deionized Water

Perfect for the Hanna Calcium Checker! Ultra-Pure deionized water that keeps your titration tests accurate and repeatable. The biggest complaint about the Hanna Calcium Checker is when the sample is diluted, if the fresh water source is not pure, it can cause irregular readings and using Hanna's...

www.bulkreefsupply.com

 

[Spare time]

ULR Phosphate and ULR Phosphorus Hanna checkers are using exactly the same methode and chemicals. Doesn't matter which one you get but the phosphate one is more convenient because it does the calculation for you. I would get the rest of the tests from Salifert. They are cheap but accurate.

The phosphorus ulr has a smaller error margin from my understanding

 

[Tavero]

The phosphorus ulr has a smaller error margin from my understanding

What's your evidence for that? I can't say anything about the error margin, but at least the cuvettes are interchangeable and produce the same results (I tested a water sample with both checkers). Maybe the phosphorus checker has a more sensitive sensor but I doubt it.

 

[Spare time]

What's your evidence for that? I can't say anything about the error margin, but at least the cuvettes are interchangeable and produce the same results (I tested a water sample with both checkers). Maybe the phosphorus checker has a more sensitive sensor but I doubt it.

5ppb is the error margin for the phosphorus ulr vs 0.2ppm for the phosphate ulr

 

[visioned]

ULR Phosphate and ULR Phosphorus Hanna checkers are using exactly the same methode and chemicals.

can confirm

 

[Tavero]

5ppb is the error margin for the phosphorus ulr vs 0.2ppm for the phosphate ulr

Not evidence and also not true at all.
First of all, phosphate ulr checker accuracy is 0.02 ppm not 0.2 ppm. That's right from the manual

So it's 20ppb vs 5ppb. But phosphate is approximately 4 times heavier than phosphorus so it equals out.
PO4 is 94 g/mol
P is 30 g/mol

Except of the final calculation, the checkers are having literally the same specifications.

 

[Randy Holmes-Farley]

I've always wondered how Hanna set those specifications. They are very useful if they reflect normal user experiences, but do they?

 

[vcnt]

I've always wondered how Hanna set those specifications. They are very useful if they reflect normal user experiences, but do they?

I ended up just getting red sea algae pro, and my po4 is still at 0, but nitrates was high around 20 so i did a 20 gallon water change this morning, should phosphate be higher?