Was looking to get one but can’t find the specs on the rear filtration compartment size. Not sure why they wouldn’t include this info in the specs. Want to know what I can/ can’t fit in it. Anyone have this tank or know where I might be able to find this info?
www.dfwaquarium.com
Tideline 62g lagoon
- Thread starter BJrReef21
- Start date
- Tagged users None
BJrReef21
Community Member
- Joined
- Jul 17, 2019
- Messages
- 87
- Reaction score
- 62
Well right after I started this thread Planet Aquariums responded to my email from the other day. With this diagram. Noting that their tanks are hand made and the dimensions can vary slightly. Hope this helps someone else.
NTar11
Active Member
Well right after I started this thread Planet Aquariums responded to my email from the other day. With this diagram. Noting that their tanks are hand made and the dimensions can vary slightly. Hope this helps someone else.
Last edited:
BJrReef21
Community Member
- Joined
- Jul 17, 2019
- Messages
- 87
- Reaction score
- 62
Nice. Would you mind checking the front to back dimension of the rear chamber? On the diagram PA sent me shows it to be 3-1/2” clear is that correct? Trying to see what skimmer I can fit in it. What’s you plan for skimmer?
NTar11
Active Member
It is indeed at 3.5 or just a hair under for clearance in all rear chambers. I am looking at Eheim skim 350 as it appears it should fit. It says its good up to 92 gallons. I am very new to this so my build is going to go extremely slow. I have a ton of learning to do.
Attachments
TheWB
2500 Club Member
That is a surface skimmer. What you need is a Protien Skimmer, such as this one.
WS-1 In-Sump Protein Skimmer
The highly-rated HOB-1 skimmer in an in-sump version!The AquaMaxx WS-1 protein skimmer features an incredibly responsive collection cup and an amazingly powerful submersible pump. It is rated up to 65 gallons in a design thin and light enough to be placed on a nano aquarium, all-in-one style...
www.bulkreefsupply.com
I saw this tank in person over the weekend. My wife suggested I buy it! 
I haven't yet, but I'm thinking it'd be a great FOWLR/anemone tank. I'm following this build for sure.
I haven't yet, but I'm thinking it'd be a great FOWLR/anemone tank. I'm following this build for sure.
BJrReef21
Community Member
- Joined
- Jul 17, 2019
- Messages
- 87
- Reaction score
- 62
That is probably the only one that will work with this tank. If only they had them available. I also thought of going with a small backpack and having the inlet and outlet piping sitting in one chamber. Anyone ever tried that?That is a surface skimmer. What you need is a Protien Skimmer, such as this one.
WS-1 In-Sump Protein Skimmer
The highly-rated HOB-1 skimmer in an in-sump version!The AquaMaxx WS-1 protein skimmer features an incredibly responsive collection cup and an amazingly powerful submersible pump. It is rated up to 65 gallons in a design thin and light enough to be placed on a nano aquarium, all-in-one style...
NTar11
Active Member
What other filtration would I require. There are two filter socks in the middle chambers. Should anything be placed in these filter socks? Probably a silly question.That is a surface skimmer. What you need is a Protien Skimmer, such as this one.
WS-1 In-Sump Protein Skimmer
The highly-rated HOB-1 skimmer in an in-sump version!The AquaMaxx WS-1 protein skimmer features an incredibly responsive collection cup and an amazingly powerful submersible pump. It is rated up to 65 gallons in a design thin and light enough to be placed on a nano aquarium, all-in-one style...
One question... Are the holes for the 2 returns a standard size? Meaning, if I don't want to run the return spinner things, can I use standard parts to change them out to something else?
NTar11
Active Member
Hole looks to be 1 3/8 inch.
TheWB
2500 Club Member
You can do that but it’s not very visually appealing and it adds the possibility of a leak outside the tank. Both of those kind of go against why you get an AIO tank in the first place.
I don’t like socks personally. Since this is a newer tank you won’t have pre-made options for alternatives but I’d look into getting floss holders or filter cups custom 3d printed to replace the socks.
NTar11
Active Member
I’m sure something could be done. Doesn’t look like it would be hard to modify.That sucks. Seems you're kind of stuck with their return option then.
Any updates on this build? I'm really thinking hard about picking one of these up!
Really curious about how much water it actually holds when full of rock and sand.
Really curious about how much water it actually holds when full of rock and sand.
Last edited:
BJrReef21
Community Member
- Joined
- Jul 17, 2019
- Messages
- 87
- Reaction score
- 62
Was mainly looking for info on the tank itself not to start a build thread. I will be picking up the tank on Thursday from my lfs and will update once I get it up and running. I will be using it to transfer most of the contents of my old 90 gallon tank.
I just picked this same tank up this past weekend and was looking for skimmer options. Has anyone tried that aquamaxx?
Just an update...ended up going with the aquamaxx ws1 in sump skimmer. Still too new for ne to give a good review but it does for very well
BJrReef21
Community Member
- Joined
- Jul 17, 2019
- Messages
- 87
- Reaction score
- 62
I also have the Aquamaxx and it has been working just fine. Took a little while to break in but has been running good for me. I will note that the cup fills up quick and needs to be cleaned often as it prevents it from doing its job well. Overall I’m happy with the purchase as it was the only one that fits well in the rear chamber. I see Tideline has a new one that is 65g and is 2” deeper. Not sure if it is the rear chamber expanding (would be very helpful) or the display size.
Similar threads
