Hi,
I've been reefing for +- 2 years now and recently added a bigger tank to my room with decent filters so that i can have a look into cooler corals.
(excuse the mess in the following pictures i've been setting everything up in the previous days)
The left tank is my original AIO Waterbox with some cheap light to sustain the kenya tree, currently there's no fish in it and everything is transfered to the new tank, still deciding what i'm gonne do with it.
the Back compartment is stuffed with Bio Balls/ceramic pipes + a skimmer. The filter socks are out of it due to to much maintenance.
The new tank is 160cm long 65 heigh and 60 width so it has some more water volume togheter with a Sump to maintain my parameters:
The sump consists of a Filter roller that goes into the first compartment filled with bio balls + 2 skimmers:
- Blue marine 2000 skimmer which does most of the work
- Nyos quantum skimmer that's connected to ozon which adds ozone to the water column at night.
I "modded" both skimmers so that they have a drain on the bottom and drain to a 20l bidon. i'm still monitoring how long this will last. ( the drain is quite far so for now it's stored in a bidon).
The 2nd department is my cheato refugium, which exists of 1 tunze lamp running 24/7 atm and a small cheato ball. The crate in the middle is to keep the foam between department 1 and 2 i will change this to a decent seperator but for now we work with what we have.
the 3rd chamber is the return chamber, in this chamber there are 2 reactor's attached with Bio Pellets/activated carbon and purigen togheter with an undersized UV i took from my other aquarium
Next to that i have an Alkatronic testing my parameters every 3 hours + an air stone ( upped my PH 0.3, not that much but once i'm back from holiday i'll look to set the air pump in the garage to pull in "fresher" air.
I'm also dosing 6ml Carbon every day to keep the nutrients etc in stock.
How it looks today:
* On the left is the sea water barrel where i mix RODI with salt, I've got a pump pumping RODI water upstairs so there's no need to carry bidons up and down.
* The "bin" on the right is my RODI Reservoir for my auto top off (75 liters) next to it is the waste bidon from the skimmers.
* The lights are not "straight" which is annoying me aswell, i'll look to fix that in the coming weeks .
I monitor the aquarium from away with a camera which i professionaly put on top of the salt.
My goal for the coming month is to clean everything up and fix the cable mess so that the cabin and rest of the room looks a bit nicer. I also will look into getting a CO2 scrubber so i can rise my PH ( currently around 8).
Once everything is stable i'll slowly add more fluorescent corals ( i really like the fancy green one right now) and see from there.
I've been reefing for +- 2 years now and recently added a bigger tank to my room with decent filters so that i can have a look into cooler corals.
(excuse the mess in the following pictures i've been setting everything up in the previous days)
The left tank is my original AIO Waterbox with some cheap light to sustain the kenya tree, currently there's no fish in it and everything is transfered to the new tank, still deciding what i'm gonne do with it.
the Back compartment is stuffed with Bio Balls/ceramic pipes + a skimmer. The filter socks are out of it due to to much maintenance.
The new tank is 160cm long 65 heigh and 60 width so it has some more water volume togheter with a Sump to maintain my parameters:
The sump consists of a Filter roller that goes into the first compartment filled with bio balls + 2 skimmers:
- Blue marine 2000 skimmer which does most of the work
- Nyos quantum skimmer that's connected to ozon which adds ozone to the water column at night.
I "modded" both skimmers so that they have a drain on the bottom and drain to a 20l bidon. i'm still monitoring how long this will last. ( the drain is quite far so for now it's stored in a bidon).
The 2nd department is my cheato refugium, which exists of 1 tunze lamp running 24/7 atm and a small cheato ball. The crate in the middle is to keep the foam between department 1 and 2 i will change this to a decent seperator but for now we work with what we have.
the 3rd chamber is the return chamber, in this chamber there are 2 reactor's attached with Bio Pellets/activated carbon and purigen togheter with an undersized UV i took from my other aquarium
Next to that i have an Alkatronic testing my parameters every 3 hours + an air stone ( upped my PH 0.3, not that much but once i'm back from holiday i'll look to set the air pump in the garage to pull in "fresher" air.
I'm also dosing 6ml Carbon every day to keep the nutrients etc in stock.
How it looks today:
* On the left is the sea water barrel where i mix RODI with salt, I've got a pump pumping RODI water upstairs so there's no need to carry bidons up and down.
* The "bin" on the right is my RODI Reservoir for my auto top off (75 liters) next to it is the waste bidon from the skimmers.
* The lights are not "straight" which is annoying me aswell, i'll look to fix that in the coming weeks .
I monitor the aquarium from away with a camera which i professionaly put on top of the salt.
My goal for the coming month is to clean everything up and fix the cable mess so that the cabin and rest of the room looks a bit nicer. I also will look into getting a CO2 scrubber so i can rise my PH ( currently around 8).
Once everything is stable i'll slowly add more fluorescent corals ( i really like the fancy green one right now) and see from there.