Switching sump out on Red Sea Reefer 170

[gavinb612]

Hey all, i’m not happy with my reefer 170’s sump. No dedicated fuge chamber, no ability to customize or do anything. I was wanting to swap it out, the dimensions are tight but I did find a fiji cube sump with what i’d want https://www.bulkreefsupply.com/fiji...MI5fumi-eU-AIVdfTjBx3zCw4kEAQYASABEgKOePD_BwE

By measuring, this would fit perfectly. My concern is plumbing, I’m usually a whole set up kinda guy, I typically don’t plumb anything myself, so i’m wondering what all parts i would need and how difficult it would be to do so. Thanks.

 

[blaxsun]

Just at a quick glance you should be able to retain the plumbing for your return pump - but the overflow pipes are on the opposite side, ie: from lower right to back left. So these would need to be redone. My advice would be to contact Red Sea to obtain their Imperial bulkhead conversion kit and then you can use this to design a new set of overflow pipes from scratch (as all the plumbing for Red Sea is in metric).

 

[gavinb612]

Just at a quick glance you should be able to retain the plumbing for your return pump - but the overflow pipes are on the opposite side, ie: from lower right to back left. So these would need to be redone. My advice would be to contact Red Sea to obtain their Imperial bulkhead conversion kit and then you can use this to design a new set of overflow pipes from scratch (as all the plumbing for Red Sea is in metric).

Ok, appreciate the reply! I wasn’t aware that was something they had, i don’t see it for sale anywhere, so it’s only through them?

 

[blaxsun]

Ok, appreciate the reply! I wasn’t aware that was something they had, i don’t see it for sale anywhere, so it’s only through them?

Right now I believe you can only obtain it directly through Red Sea. They don't even have a part number for it on their website, so your best bet is to contact them for details.

 

[BCI Can Do Better]

I'm in this exact same situation. Were you able to get your sump swapped out?

 

[Quinn]

Any luck? Following

 

[BCI Can Do Better]

Any luck? Following

I am going to move forward with upgrading to the Fiji 20 sump in the next month or so. Based on the info from another post I contacted Red Sea about their metric to standard bulkhead screw thing and they said part # R42436 is what you need. This is the only site I found it listed on https://fishtanksdirect.com/red-sea-3-4-and-1-pipe-connector-for-all-reefers-not-g2-series/ but it is out of stock. Red Sea said I had to have a dealer order them, so in a few weeks my LFS will have 3 in for me. Once I have all the parts gathered I'll make a new thread to go through what I do.

 

[Quinn]

I am going to move forward with upgrading to the Fiji 20 sump in the next month or so. Based on the info from another post I contacted Red Sea about their metric to standard bulkhead screw thing and they said part # R42436 is what you need. This is the only site I found it listed on https://fishtanksdirect.com/red-sea-3-4-and-1-pipe-connector-for-all-reefers-not-g2-series/ but it is out of stock. Red Sea said I had to have a dealer order them, so in a few weeks my LFS will have 3 in for me. Once I have all the parts gathered I'll make a new thread to go through what I do.

If you haven’t ordered yet I found this on eBay. 15% off right now!! Makes is $305.

Fiji Cube Fiji-20 Advanced Reef Sump 2nd Gen 761856629547 | eBay

Find many great new & used options and get the best deals for Fiji Cube Fiji-20 Advanced Reef Sump 2nd Gen at the best online prices at eBay! Free shipping for many products!

www.ebay.com