Hi,
First tank, first time cycling. But i think either my cycle has failed (to even start) or stalled.
I am doing a fishless cycle with Dr Tims One and Only.
I was following the Dr Tims instructions. Got the tank up to salinity, let water heat to 25C then added the Dr Tims one and only bottle. Then dosed ammonia at the ratio as printed on the bottle (4 drops per gallon).
Left the tank and have been monitoring parameters for the past 2 weeks.
Day 1 saw 2.0ppm ammonia (Using red sea test kit). Test kit only goes to 2.0ppm, so probably higher?
PH has never dropped below 8 in this time. Currently at 8.2 PH and pretty stable. I am using a reef factory PH meter to track.
Salinity is stable at 35ppt.
Ammonia has remained at 2ppm since the start. There has been some, but nearly immeasurable traces of Nitrite (using the Salifert test kit), the water does change color, but its so slight it might as well be 0.
Nitrates seem to be somewhere around 1-2mg/L (Nyos test kit).
And thats what my tank has been sitting at for the last 2 weeks.
As part of Dr Tims strategy, a water change was in there. So I did a 40% water change. I thought maybe I had overdosed Ammonia.
This lowered Ammonia down to around 1.2PPM (Red sea test kit again), which was performed 3 days ago. But still no sign of Nitrate/Nitrite, nor falling Ammonia.
I purchased a Salifert Ammonia test kit. It is reading around 0.25mg/l (about 0.25ppm). Stark difference.
Repeated the Salifert ammonia test and same result, 0.25mg/L
Which do i believe?
Maybe I need to go buy a third test kit... sigh.
Should I interfere yet, or just let the tank continue as is?
Maybe my Dr Tims bottle of bacteria was dead on arrival?
Cheers.
First tank, first time cycling. But i think either my cycle has failed (to even start) or stalled.
I am doing a fishless cycle with Dr Tims One and Only.
I was following the Dr Tims instructions. Got the tank up to salinity, let water heat to 25C then added the Dr Tims one and only bottle. Then dosed ammonia at the ratio as printed on the bottle (4 drops per gallon).
Left the tank and have been monitoring parameters for the past 2 weeks.
Day 1 saw 2.0ppm ammonia (Using red sea test kit). Test kit only goes to 2.0ppm, so probably higher?
PH has never dropped below 8 in this time. Currently at 8.2 PH and pretty stable. I am using a reef factory PH meter to track.
Salinity is stable at 35ppt.
Ammonia has remained at 2ppm since the start. There has been some, but nearly immeasurable traces of Nitrite (using the Salifert test kit), the water does change color, but its so slight it might as well be 0.
Nitrates seem to be somewhere around 1-2mg/L (Nyos test kit).
And thats what my tank has been sitting at for the last 2 weeks.
As part of Dr Tims strategy, a water change was in there. So I did a 40% water change. I thought maybe I had overdosed Ammonia.
This lowered Ammonia down to around 1.2PPM (Red sea test kit again), which was performed 3 days ago. But still no sign of Nitrate/Nitrite, nor falling Ammonia.
I purchased a Salifert Ammonia test kit. It is reading around 0.25mg/l (about 0.25ppm). Stark difference.
Repeated the Salifert ammonia test and same result, 0.25mg/L
Which do i believe?
Maybe I need to go buy a third test kit... sigh.
Should I interfere yet, or just let the tank continue as is?
Maybe my Dr Tims bottle of bacteria was dead on arrival?
Cheers.