- Joined
- Nov 18, 2019
- Messages
- 33
- Reaction score
- 8
Hello,
I am selling my used Reefer 350 deluxe. I've had the tank up and running since January of 2019, so it's not even two years old yet. Two Red Sea reef LED 90 lights with mounting hardware and power supplies are included. All the stock plumbing is also included. Two filter socks and a media cup are included as well.
I do NOT have the original ATO reservoir and the original float valve for the ATO system will not work since it's missing pieces. However, I am including a 10 gallon reservoir that has a lid and an open hole on the top for tubing/wires to pass through -- it works great with an ATO system like the Tunze.
I am also throwing in a Reef Octo VarioS 4 return pump. The pump is already fitted with an adapter appropriate for the stock plumbing.
There are some problems with the tank,
The doors/hinges were never installed properly from day 1. I just wasn't able to get them right for whatever reason. They can be kind of annoying to close and they don't open as they should when you push on them. You may want to remove the hinges/doors and see if you can install them properly.
Unfortunately, there was an accident while transporting the cabinet and the corner of the cabinet was damage -- which you can clearly see in one of the included photos.
There are a couple of very small scratches on the front glass that happened months ago while I was cleaning the glass. They're virtually unnoticeable. I honestly wasn't even able to locate them for a photograph but I do know that they're there. But again, it's nearly impossible to notice them because they're so small.
Also, one side of the filter sock tray holder came loose. The other side is in tact so it's still possible to use filter socks, but it is kind of annoying to get the tray to stay. This actually happened within the first couple months of the aquarium running and I've been using filter socks all this time with the broken tray holder. So, it's not a huge deal but is kind of annoying. I do wish I would have contacted Red Sea at the time because the tank was obviously still under warranty.
I am sorry for all the coralline still on the glass. I did get probably 30-40% of it off but it's just very time consuming. I just want the tank gone and don't want to work on it anymore. My saltwater journey has been a very bumpy ride and I'm just exhausted with it at this point. I just really want it gone.
I know it's a bit of a fixer-upper, so $800 takes it all. If you're in the Mid-Michigan area, and want to come take a look at everything before committing to a purchase, you are welcome to do so. I also have a nearly full bucket of Red Sea Coral Pro salt. You can have it if you want it.
I am selling my used Reefer 350 deluxe. I've had the tank up and running since January of 2019, so it's not even two years old yet. Two Red Sea reef LED 90 lights with mounting hardware and power supplies are included. All the stock plumbing is also included. Two filter socks and a media cup are included as well.
I do NOT have the original ATO reservoir and the original float valve for the ATO system will not work since it's missing pieces. However, I am including a 10 gallon reservoir that has a lid and an open hole on the top for tubing/wires to pass through -- it works great with an ATO system like the Tunze.
I am also throwing in a Reef Octo VarioS 4 return pump. The pump is already fitted with an adapter appropriate for the stock plumbing.
There are some problems with the tank,
The doors/hinges were never installed properly from day 1. I just wasn't able to get them right for whatever reason. They can be kind of annoying to close and they don't open as they should when you push on them. You may want to remove the hinges/doors and see if you can install them properly.
Unfortunately, there was an accident while transporting the cabinet and the corner of the cabinet was damage -- which you can clearly see in one of the included photos.
There are a couple of very small scratches on the front glass that happened months ago while I was cleaning the glass. They're virtually unnoticeable. I honestly wasn't even able to locate them for a photograph but I do know that they're there. But again, it's nearly impossible to notice them because they're so small.
Also, one side of the filter sock tray holder came loose. The other side is in tact so it's still possible to use filter socks, but it is kind of annoying to get the tray to stay. This actually happened within the first couple months of the aquarium running and I've been using filter socks all this time with the broken tray holder. So, it's not a huge deal but is kind of annoying. I do wish I would have contacted Red Sea at the time because the tank was obviously still under warranty.
I am sorry for all the coralline still on the glass. I did get probably 30-40% of it off but it's just very time consuming. I just want the tank gone and don't want to work on it anymore. My saltwater journey has been a very bumpy ride and I'm just exhausted with it at this point. I just really want it gone.
I know it's a bit of a fixer-upper, so $800 takes it all. If you're in the Mid-Michigan area, and want to come take a look at everything before committing to a purchase, you are welcome to do so. I also have a nearly full bucket of Red Sea Coral Pro salt. You can have it if you want it.