I have reef pi installed on a Zero W. I don't know very much about using terminal commands. I know that I have to use sudo systemctl start reef-pi.service to get reef pi started. I have read 100's of post trying to find the steps to add this so reef pi will start on its own after a reboot. Can someone direct me to a step by step directios to show me how to do this? Thanks.
Reef Pi will not start after a reboot or power off.
- Thread starter Brett7397
- Start date
- Joined
- Aug 9, 2021
- Messages
- 730
- Reaction score
- 917
- Review score
- +0 /0 /-0
- Location
- Murrieta, CA (North of San Diego)
reef-pi 6.0 - release announcement
Hi team, i have just updated the README of esp32 firmware , it covers the key pices (library install, api specifics for testing and how it works). @Sral let me know if you are planning to write a guide on the integration, then i will not worry about it :-) . Else, i'll try to write a more...
www.reef2reef.com
sudo systemctl start reef-pi.service
sudo systemctl enable reef-pi.service
- Joined
- Feb 14, 2020
- Messages
- 946
- Reaction score
- 1,259
- Review score
- +0 /0 /-0
- Location
- Edmonton, Canada
I was recently informed those commands were somehow missing from the script, not sure how or when I did that. If you still have the problem run these 3 commands again, that should fix it.
Software Installation Manual - Windows.docx
Raspberry Pi OS and reef-pi Software Installation Manual Using Windows - Robo-Tank Table of Contents Table of Contents 2 1. Install Raspberry Pi OS (Raspbian) 3 2. Access Raspberry Pi via SSH 10 3. Install reef-pi 12 4. Other Manuals 13 1. Install Raspbe...
I ran the 3 commands again and it is working. I have rebooted it 2 times and it is running when I use Chrome to use the UI. Thank you for the help.
- Joined
- Feb 14, 2020
- Messages
- 946
- Reaction score
- 1,259
- Review score
- +0 /0 /-0
- Location
- Edmonton, Canada
Thanks for confirming, sorry it had you going in circles.I ran the 3 commands again and it is working. I have rebooted it 2 times and it is running when I use Chrome to use the UI. Thank you for the help.
Similar threads
