@robsworld78 - Trying to get the lighting setup with reef pi and robo tank but running into an issue. Tested with my multimeter and looks like reef pi is only changing the voltage on ch1 (Max 10v or 5v depending on the dip switches) all other channels only output 12v no matter what I change in reef pi.
It's the latest robo tank, pi zero w 2 (as the deluxe package). Reef pi 5.2. Attached is the setting on the pins, matches the manual. Have reloaded/rebooted multiple times. I've tried the 3.5mm plugs and the screw terminal pins too, same behavior. The dip switches also have no effect on ch 2-8.
Any thoughts? Happy to diagnose with some guidance.
It's the latest robo tank, pi zero w 2 (as the deluxe package). Reef pi 5.2. Attached is the setting on the pins, matches the manual. Have reloaded/rebooted multiple times. I've tried the 3.5mm plugs and the screw terminal pins too, same behavior. The dip switches also have no effect on ch 2-8.
Any thoughts? Happy to diagnose with some guidance.