So I purchased a new to me Red Sea Reefer 525XL and am ready to finally fill it with water. The previous owner had it up and running with no issues. After I purchased it I began researching for ideas and came across all the issues with seams giving out and i started to get worried. I have found that a lot of these issues dealt with bubbles in the silicone and the tanks not being level. I have attached some images of the seams and was wondering if it should be anything to worry about. I know that these are from the glass scraper but none seem to go into the adjoining glass pane. Resealing is not an option but would greatly appreciate any feedback!
![E080666B-E84B-4290-BE43-883A70F004A2.jpeg E080666B-E84B-4290-BE43-883A70F004A2.jpeg](https://test.reef2reef.com/data/attachments/2824/2824750-5893603ae04cbd1bdec527323a7ff17e.jpg)
![0CB83938-5BCB-4A9B-A521-906E44D8A84C.jpeg 0CB83938-5BCB-4A9B-A521-906E44D8A84C.jpeg](https://test.reef2reef.com/data/attachments/2824/2824748-a9f6bdfa8fccbec8658ffa671f5f6faf.jpg)
![A96EC245-8AEE-4FBB-B8F2-EFCE08EF62C7.jpeg A96EC245-8AEE-4FBB-B8F2-EFCE08EF62C7.jpeg](https://test.reef2reef.com/data/attachments/2824/2824749-78b4f827696f5f81cbcec1c8b90c0d83.jpg)
![E080666B-E84B-4290-BE43-883A70F004A2.jpeg E080666B-E84B-4290-BE43-883A70F004A2.jpeg](https://test.reef2reef.com/data/attachments/2824/2824750-5893603ae04cbd1bdec527323a7ff17e.jpg)
Last edited: