- Joined
- May 2, 2013
- Messages
- 5,790
- Reaction score
- 5,490
- Review score
- +2 /0 /-0
- Location
- LIVING WELLS MONTANA
@DesertCitiesReefer I anxious to see how that Sky light works on your tank. Keep us posted!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
@DesertCitiesReefer on the green and red paired lights is that a specific faceplate they’re in or did you drill holes in that board?Some photos finally.
View attachment 2485688
before anyone says bad placement due to sunlight. My other tank is by the other window and when direct sunlight hits this side which is very shortly the blinds are all closed.
View attachment 2485690
View attachment 2485691
View attachment 2485692
control box from Adaptive Reef. The blank spots will have 2 DOS when the faceplates arrive.
I drilled the holes in the faceplate.@DesertCitiesReefer on the green and red paired lights is that a specific faceplate they’re in or did you drill holes in that board?
@DesertCitiesReefer I sent you a PM.@DesertCitiesReefer on the green and red paired lights is that a specific faceplate they’re in or did you drill holes in that board?
@DesertCitiesReefer what PAR meter did you use? Also are those WAVs on the back glass panel? Forgive me if I asked before.
I used a Seneye for my PAR readings. Yes those are 2 Neptune WAV Pumps mounted in the back panel.@DesertCitiesReefer what PAR meter did you use? Also are those WAVs on the back glass panel? Forgive me if I asked before.
@DesertCitiesReefer what power setting ranges to you have them set to and what modes do you run them in? I’m thinking of going to NS WAVs. I’m maxed out on space and WAVs don’t have control boxes or power bricks when you plug them into an EB832. Save me a lot of space that way.I used a Seneye for my PAR readings. Yes those are 2 Neptune WAV Pumps mounted in the back panel.
Here is what I have them set at. I believe I found this setting searching the shared settings.@DesertCitiesReefer what power setting ranges to you have them set to and what modes do you run them in? I’m thinking of going to NS WAVs. I’m maxed out on space and WAVs don’t have control boxes or power bricks when you plug them into an EB832. Save me a lot of space that way.
@DesertCitiesReefer I do believe there’s a setting in shared settings recommended for Reefer 250s.Here is what I have them set at. I believe I found this setting searching the shared settings.
View attachment 2554570View attachment 2554571