Radion, Apex Sky, AI Hydra, Kessil LED Rail Mount

[neonreef3d]

Selling Terms Of Service

1. YES I have read the terms and agree to them

After having seen all the mounting options that were available and the lack there of, There were still gaps to be filled, so I decided to design and 3D Print very simple mounts for the Radion and SKY LED and other brand fixtures that will mount to the 8020 rails, and other sizes as well.
Mounts are made from virgin PETG filament that is made is USA.

I never use imported filament, as it is made from recycled plastics that has other types of plastics and is a poor quality plastic.

All mounts include nylon washers and stainless steel hex button head bolts.

Mounts vary in price depending on the model $10-$25 per set. Shipping is $6.

 

[neonreef3d]

 

[stevediaz1]

After having seen all the mounting options that were available and the lack there of, There were still gaps to be filled, so I decided to design and 3D Print very simple mounts for the Radion and SKY LED and other brand fixtures that will mount to the 8020 rails, and other sizes as well.
Mounts are made from virgin PETG filament that is made is USA.

I never use imported filament, as it is made from recycled plastics that has other types of plastics and is a poor quality plastic.

All mounts include nylon washers and stainless steel hex button head bolts.

Mounts vary in price depending on the model $10-$25 per set. Shipping is $6.View attachment 2843944View attachment 2843947View attachment 2843948View attachment 2843949View attachment 2843951

Do you have anything for a Kessil a360?

 

[neonreef3d]

Do you have anything for a Kessil a360?

Yes I have them available for the kessil a360x, and for the ap9x also.
I make them for almost every led fixture available.

picture bellow shows a custom configuration for kessil leds in center and adjustable mounts on the outside for led bars.

 

[argiBK]

Any chance you have a mount for the AP9X that allows for swivel/angling from the center point (above the fixture)?

 

[neonreef3d]

Any chance you have a mount for the AP9X that allows for swivel/angling from the center point (above the fixture)?

That would be a custom order, if your interested, send me a message.

 

[lasithawicks]

neon_reefer pls check your inbox..

thx

 

[Ali-F]

Can you design something for the ATI Straton LED? here is the design of the light.

Straton LED - ATI (DISCONTINUED)

Create A Uniform Blanket Of Light With The ATI Straton LED Providing one of the largest illuminated banks of LEDs available, the ATI Straton mimics T5’s proven track record of excellent coral growth and even spread. Especially important for SPS colonies, the broad spread and diffused bank of...

www.bulkreefsupply.com

 

[neonreef3d]

Since this fixture is discontinued and is no longer available, it would be almost impossible to make and test fit a prototype since I cannot get one to design the mount around. If there is anyone out there in the Los Angeles area that needs a mounting solution for this model, I can make and test fit the part, and that would cut the lead time.

 

[Ali-F]

Since this fixture is discontinued and is no longer available, it would be almost impossible to make and test fit a prototype since I cannot get one to design the mount around. If there is anyone out there in the Los Angeles area that needs a mounting solution for this model, I can make and test fit the part, and that would cut the lead time.

thanks for the reply. it's worth the shot.