Bought a new protein skimmer for my 30 gallon. It’s a Bubble Magus QQ1… it keeps overflowing and there are lots of micro bubbles coming out of the bottom… anyone know how to fix this?
Protein Skimmer help!
- Thread starter Blackcoupe369
- Start date
Yes to what ryan said. You need the long screw that threads into the center hole. Screw it in to snug, then tighten or loosen by small adjustments till you get it right.
Also, make sure the sponge/bubble trap is in place.
Also, break in time can be a couple of days And every time you take the cover off, like to clean it, you can have bubbles for a while.
I have used one, it really works well, it just takes a bit of patience and fiddling with.
Also, make sure the sponge/bubble trap is in place.
Also, break in time can be a couple of days And every time you take the cover off, like to clean it, you can have bubbles for a while.
I have used one, it really works well, it just takes a bit of patience and fiddling with.
Yes to what ryan said. You need the long screw that threads into the center hole. Screw it in to snug, then tighten or loosen by small adjustments till you get it right.
This hole, correct?
Attachments
Yes, you should have a long screw. It's what holds everything together and the skimmer in the tank.
The cup is still filling up too fast
Lift unit slightly and see if the bubbling reduces. If so, it may be in too deep of water and you will have to shim it to elevate it a little
I fixed the micobubble problem… only problem is the cup is filling too fast. Thanks for the reply
You can raise the collection cup. Just loose the screw that holds it tight and raise and re tight the screw.
Similar threads
