Noo-Psyche K7 Pro III QR Code Profile Generator

[BeanAnimal]

I built this...

Noo-Psyche K7 Profile Generator | BeanAnimal's Reef

Noo-Psyche K7 profile generator can be used to generate custom QR Code lighting profiles for Noo-Psyche K7 Pro III reef aquarium LED light fixtures.

beananimal.com

Should be much easier to use (as compared to the noopsyche app) for creating schedules.

It works - Needless to say - use it at your own risk.

Use a desktop or tablet - too much going on for a pleasant mobile experience.

There are instructions, but it is self explanatory.

I may get bored and add some transformation functions for time-shift and power level curve boost/cut (overall and per channel).... but don't hold your breath. At this point it is finished as far as I am concerned.

 

[Jonreefer]

maybe i am using it wrong. the sliders dont seem to do anything

 

[BeanAnimal]

maybe i am using it wrong. the sliders dont seem to do anything

The chart is used to adjust the schedule - with a set of nodes and trendline for each channel.
The sliders are used to adjust the manual mode color mix of the 6 channels.

adjusting either automatically adjusts the QR Code on the fly.

 

[TimG]

This is very nice!

 

[BeanAnimal]

Profile Generator has been updated with very basic tools time shift a profile as well as increase or decrease its overall overage power. The power adjust DOES NOT interpolate or recreate curves, it simply adjusts any non zero power value up or down 1% at a time.

I may put a color/channel selector in place so that you can move individual channels instead of all of them at one... maybe...

 

[BeanAnimal]

Update with ability to select which channels to move

 

[WVNed]

So how do I type numbers into a spreadsheet and make them into a QR code?

I am starting to like my old NP lights that use the remote better.

 

[BeanAnimal]

I never finished the spreadsheet version...
But my web-app is easier than a spreadsheet actually. Just drag the sliders around until you have what you like set.

 

[BeanAnimal]

So how do I type numbers into a spreadsheet and make them into a QR code?

I am starting to like my old NP lights that use the remote better.

I like the NP light with regard to form factor, PAR and color rendering.

The app is beyond terrible, both from a setup and usability standpoint. The QR code feature is the saving grace from a programming standpoint. The LAN/APP mode stuff is a mess and the fact that the application can't remember the IP/Login for each fixture is silly.

I am moving on to GHL Mitras. I am just waiting on a second backordered fixture.

 

[WVNed]

I like the NP light with regard to form factor, PAR and color rendering.

The app is beyond terrible, both from a setup and usability standpoint. The QR code feature is the saving grace from a programming standpoint. The LAN/APP mode stuff is a mess and the fact that the application can't remember the IP/Login for each fixture is silly.

I am moving on to GHL Mitras. I am just waiting on a second backordered fixture.

I have used the 4 of the lights with the remote and the hardest part is remembering what to do if I want to change something.
I got 6 more and they are working fine in AP mode. My problem with the app is the phone screen and my dexterity.
I am not of the texting generation.

 

[BeanAnimal]

The QR function should be a big help then. All you need to do is login and upload the code with the changes that you want. My app will also suck in existing QR codes so that you can tweak and re-save.

 

[MikeIkerson]

This is great, thank you for making it.

 

[Владимир]

Генератор перестал работать!не безопасный сайт.

 

[bedfellow]

@BeanAnimal how difficult would it be to adapt this to work with the noopsyche k7 mini, which has 3 channels? I have my schedule in Excel and theoretically I could generate the barcode from that, if I could understand how it works.

Here's an example schedule and the resultant barcode:

 

[bedfellow]

@BeanAnimal how difficult would it be to adapt this to work with the noopsyche k7 mini, which has 3 channels? I have my schedule in Excel and theoretically I could generate the barcode from that, if I could understand how it works.

I figured it out and did one using Google Sheets...

 

[etreynol]

I figured it out and did one using Google Sheets...

Can you share the sheet? I'm looking for this capability.

Thanks!

 

[Vinaka_vakalevu]

I built this...

Noo-Psyche K7 Profile Generator | BeanAnimal's Reef

Noo-Psyche K7 profile generator can be used to generate custom QR Code lighting profiles for Noo-Psyche K7 Pro III reef aquarium LED light fixtures.

beananimal.com

Should be much easier to use (as compared to the noopsyche app) for creating schedules.

It works - Needless to say - use it at your own risk.

Use a desktop or tablet - too much going on for a pleasant mobile experience.

There are instructions, but it is self explanatory.

I may get bored and add some transformation functions for time-shift and power level curve boost/cut (overall and per channel).... but don't hold your breath. At this point it is finished as far as I am concerned.

Bean, sorry to resurrect a dead thread but are you using these same setting on your Pro3? putting one over a little 20 gal today and was just going to use your settings if you still like them

 

[BeanAnimal]

I only used the light for a few months. I liked them but moved to GHL Mitras somewhat on a whim and somewhat for the ease of control. I don't have the settings I was running handy. Sorry.

 

[Vinaka_vakalevu]

I only used the light for a few months. I liked them but moved to GHL Mitras somewhat on a whim and somewhat for the ease of control. I don't have the settings I was running handy. Sorry.

no worries ill just use that QR and go from there!

thanks