New skimmer (jad wg 520) no bubbles

AI Hydra

alexytman

Active Member
Review score
+0 /0 /-0
View Badges
Joined
Feb 5, 2017
Messages
289
Reaction score
107
Review score
+0 /0 /-0
Rating - 0%
0   0   0
Hi I recently got a 75g tank and filled it with fresh water to see if its all running and if there's any leak. However when I tested the skimmer (jad wg 520) some Chinese brand, there was no bubbles (I even removed the airline adjuster to make sure there isn't anything blocking it)

what would cause it? It's brand new
 
www.dinkinsaquaticgardens.com
AquaCave Logo Banner

tdileo

Valuable Member
Review score
+0 /0 /-0
View Badges
Joined
Jul 6, 2017
Messages
2,049
Reaction score
1,687
Review score
+0 /0 /-0
Location
New Jersey
Rating - 0%
0   0   0
The pump should make bubbles but they wont be coming out of the top part of the skimmer like normal. If you don't have salt water on hand you can put it in a bucket with water and vinegar filled to the correct depth and it will work
 
OP
OP
alexytman

alexytman

Active Member
Review score
+0 /0 /-0
View Badges
Joined
Feb 5, 2017
Messages
289
Reaction score
107
Review score
+0 /0 /-0
Rating - 0%
0   0   0
The pump should make bubbles but they wont be coming out of the top part of the skimmer like normal. If you don't have salt water on hand you can put it in a bucket with water and vinegar filled to the correct depth and it will work
there is 0 bubbles not from side button, anywhere
 

Mele__Reef

Active Member
Review score
+1 /0 /-0
View Badges
Joined
Jun 21, 2016
Messages
372
Reaction score
217
Review score
+1 /0 /-0
Rating - 0%
0   0   0
This happened to mine upon setup. Take it apart and make sure everything is connected properly and also sealed tight . Especially the Venturi. You Also may need to adjust the height of the skimmer in the water level. Most companies will tell you the recommended depth of water the skimmer needs to be submerged in to work properly. Good luck!
 
Top Shelf Aquatics
OP
OP
alexytman

alexytman

Active Member
Review score
+0 /0 /-0
View Badges
Joined
Feb 5, 2017
Messages
289
Reaction score
107
Review score
+0 /0 /-0
Rating - 0%
0   0   0
This happened to mine upon setup. Take it apart and make sure everything is connected properly and also sealed tight . Especially the Venturi. You Also may need to adjust the height of the skimmer in the water level. Most companies will tell you the recommended depth of water the skimmer needs to be submerged in to work properly. Good luck!
thanks, however it came with little instructions and the only thing written in trouble shooting is make sure airline is not submerged.

I will take it apart when I return home
 
www.dinkinsaquaticgardens.com
AI Nero 5

Polyp polynomial: How many heads do you start with when buying zoas?

  • One head is enough to get started.

    Votes: 27 10.6%
  • 2 to 4 heads.

    Votes: 145 57.1%
  • 5 heads or more.

    Votes: 65 25.6%
  • Full colony.

    Votes: 10 3.9%
  • Other.

    Votes: 7 2.8%
Visit Detroit Reef Club
Back
Top