Trident going into test A Fail when testing all three parameters. If I test just alkalinity the trident completes the test. The trident is out of calibration and alkalinity is off. When I try to calibrate the trident it also goes into test A fail.
My reagents are all over 50% full. I’ve also disconnected the sample feed line and waste line from the trident and flushed them with rodi water. I disconnected them from inside the tident. Still getting Test A Fail. My fusion shows a reading for alk but is 0 for calcium.
My reagents are all over 50% full. I’ve also disconnected the sample feed line and waste line from the trident and flushed them with rodi water. I disconnected them from inside the tident. Still getting Test A Fail. My fusion shows a reading for alk but is 0 for calcium.