So on Friday I went out and bought a trident with an apex el and set it all up after running the trident for over 48 hours I followed the instructions and used the calibration solution and calibrated my trident. Since hooking up the trident it has been reading very weird numbers for Ca/Mg and I have no idea how to fix this as I got a test done by a local fish store and the Ca is showing like 100+ over what a red sea test kit will read, the magnesium is having the same problem reading like 100-200+ whatever a red sea will read as well. I thought after using the calibration solution it would fix this but it didn't my readings are still insanely wrong and the Alkalinity is the only thing reading correctly in response with a Hanna checker. I am super frustrated with this machine as with how much it cost I would expect it to work right out the box and not give me all these problems with it's readings as I followed everything it told me to the T. It even isn't staying stable I don't know if that's normal to fluctuate the amount it does. If anyone has any experience with fixing this problem please let me know or if you are using a trident as well and know anything let me know. Images are down below the super low numbers for ca and mg is when it was calibrating.